Neal Hardin

Thank you...that is what I was afraid of. I have a Leash Electronics Street-Strip board that I was going to hook up. I will mess with this BCM a bit more and will just learn on it now. Ultimately, I will rip-n-replace. Appreciate the help!

Firstly, i did a search and nothing. I have pulled out all of the stock ECU/TCU (running a TH-400 now) and replaced with Holley Terminator X. The Fuse box is still there with all the parking lights, turn signals, windows, radio, fan, etc all WORKING...but when I turn on the Headlights, NADA! I have checked the Switch (all good), Fuses (all good), Relays (working) and nothing. We tested the headlight plugs and they are not getting power. I have all new grounds on the motor/chassis and Someone told me to check the "dome light" and turn on/off a 1000x and NADA. It's in the garage, and same person asked me to check the "light sensor" on the dash, and that the dome light works that too. i have NOT replaced the multi-switch for the turn signals/high/low beams, as they were all working before I deleted the ECU and wires. I made a Video here: Thanks all!! -Neal