vettecowboy78

I bought a Diablo Sport tuner that corrected the speedo along with a better tune so I do not know how far off it was. As far as gas mileage, I get around 12-15 mpg’s when driving around town and when on a long trip driving highway I get around 17-19 mpg. I currently have the 3.42 gears and when I put 35 inch tires on will probably go to 4.10 gears Sent from my iPhone using Tapatalk

I have the exact same set up and currently have Nitto Terra Grappler 295/70 r17’s. With that being said, the next time I order tires I’m gonna go with 315/70 r17’s because I am certain they will fit with my stock wheels. If you’re a little hesitant on the 34’s you could always go with 305/70 r17 Sent from my iPhone using Tapatalk

They're shitty photos but here are a couple of rear shots with a 1.5 BL. Furthermore I had to adjust the rear exhaust hanger and pound on it so it would pull up the exhaust, otherwise it looks goofy hanging so low. Sent from my iPhone using Tapatalk

I'll take a few photos for you but your local shop is right. You won't even notice the difference on the 1.5 bl Sent from my iPhone using Tapatalk

I talked to a GMC mechanic about doing this and was told that it wouldn't work because the stock one is integrated into the display. Ever notice when you are scrolling through the display that there is a blank page, that's where the settings for the brake controller would be displayed if your truck came equipped with the stock one. The day I brought my truck home I noticed the pigtail in the glove box and was all excited thinking I could do the same thing you were talking about but oh well. Sent from my iPhone using Tapatalk

First thing I said in my post was, "I don't have the light bar installed yet". Don't even have it purchased yet but am looking to purchase a 20" single row for the front bumper. Sent from my iPhone using Tapatalk

So I don't have the light bar installed yet BUT I installed the switch that I wanted to use today LOL. Here are the pics below. Keep in mind that my truck did not originally come with a center console, I installed it after buying the truck. I was able to get the USB ports to work. Prior to installing the center console, the truck had only one cigarette lighter so when I put the console in I left the second cigarette lighter alone with the intent of using it for a spot to install my aux switch. I had to remover the lighter and trim the switch a little but I think it turned out okay. The cover doesn't close completely but it's damn near close. Sent from my iPhone using Tapatalk

I did like most everyone else on here... 2.5 RC level but I used larger rear blocks to maintain a cant to the truck and went with a zone 1.5 body lift. Tires are Nitto Terra Grappler 295/70 r17. Plenty of clearance. Sent from my iPhone using Tapatalk

For those of you that are experiencing the clunk sound from the bed after installing your body lift. I think I may know what it's coming from. I think the square spacer that is placed in lieu of the rubber pad located in the wheel well area is what is clunking. I put the rubber pad on top of that and secured the block as directed by Zone off-road and I don't have any clunking sounds. Sent from my iPhone using Tapatalk

For the guys with a 1.5" or 1.25" BL and have a bull bar or brush guard... did you have to modify the bull bar to get it to fit on the truck. I currently only have the RC 2.5 level kit but want to instal the zone 1.5 BL and a bull bar but wasn't sure I could with the BL. Thanks in advance! Sent from my iPhone using Tapatalk

Gotcha I currently only have a 2.5 level kit with 34x11.5 tires on the stocks 17 wheels and was looking to go with 17x9 with -12 offset but was pretty sure I would rub like hell... now I know I will lol Sent from my iPhone using Tapatalk

Any rubbing?? And what size lift?? Sent from my iPhone using Tapatalk

It's pretty good for being an eBay grill. I did have to get stainless screws to mount the inner brace to it because the original has bolts. Besides the inner brace, it mounted perfectly right in place of the stock one. The only complaint I have is that there are tiny blemishes on all four corners where the mold disconnects from the grill. I attached photos to show you what I mean. They are barely noticeable though. Sent from my iPhone using Tapatalk

Nice, thanks! Sent from my iPhone using Tapatalk

What brand and model bug deflector do you have? Sent from my iPhone using Tapatalk