Finally did the HID upgrade. I used the Morimoto Silverado Kit 35W, 5500k with extension and Capacitor Link. After doing the fogs this was pretty easy, although it took us 3 hours because we could not get the damn thing to light. Checked all connections and power, fuses, come to find out the pins at the OEM source wasn't making good contact. Got that sorted out and viola! Took some not so good pictures for those who may need a hand.
Installation:
Laid out everything and made sure it worked before running harnesses.
-Driver side ballast as you can see is on the fender with 3M tape behind to kill any vibrations.
-Passenger side ballast was a bit of pain, but managed to mount it on rad support in front of air box.
-HD Relay Harness was mounted on the bottom of the Air Box tray, I used one of the tray bolts to slide the hole of the HD Harness bracket on to and find a matching nut. Wanted to put this on the fender but I only got 1 ext and for some reason that wasn't enough.
- Cap Link sat on top of the rad support with 3M tape with the wires also running on top of the rad support.
- Dust cap, worst enemy ever!!! ?
Couple things I noticed, whatever alignment issues I had with OEM bulbs have been magnified big time with the HID bulbs. It really is a big difference but I need to do some adjustments on the passenger side particularly. I read to make sure that the bulbs are set a certain way but these only go in one way so I don't know if the rod on the bulb is where it should be? Anyone? All in all a 2/5 difficulty rating to do the job!