Jump to content

Kylebr1

Member
 View Profile  See their activity

  • Posts

    89

  • Joined

  • Last visited

 Content Type 

Everything posted by Kylebr1

  1. Kylebr1
    You have a 8 speed though right .? Thats a pretty common issue with them .
  2. Kylebr1
    Sorry to revive a old thread has anyone used this pan or know the stock# for the appropriate pan ? https://www.summitracing.com/int/parts/ado-24239529/overview/
  3. Kylebr1
    Anyone see or use this type of filter set up ? Looks like a pretty new concept to me . https://www.knfilters.ca/oil-filters/ss-2011-oil-filter-billet
  4. Kylebr1
    Sounds like a bad Charging system . Alternator issue . Check your voltage at the alternator at idle .
  5. Kylebr1
    is the carpet left with a hole after the shifter cover is removed ?
  6. Kylebr1
    Did the Yukon Axles first which got rid of 90% of my vibration the driveshaft got rid of the rest .
  7. Kylebr1
    Any pics from the top ?
  8. Kylebr1
    Yukon Axles and new 5" aluminum driveshaft 1 piece .
  9. Kylebr1
    Vibration gone . !
  10. Kylebr1
    i ordered a 5 " diameter aluminum one piece instead will be here this week from my local drive line shop .
  11. Kylebr1
    I have not had my driveshaft balanced yet switching my axles made a hugee difference almost perfect i will be buying a 2 piece driveshaft eventually so i am not going to waste my money on getting mine re balanced . This way if it is a backlash issue or a balancing issue the 2 piece unit will get rid of the vibration transfer .
  12. Kylebr1
  13. Kylebr1
    hmm K sounds good i have a appointment set for next week at a local drive line shop to have my driveshaft checked maybe ill have them look at my diff at the same time . Thanks for the reply .
  14. Kylebr1
    I have AFM disabled on my truck . and i just gave the truck a bit of gas and it dropped down a gear but stayed at the same speed made the vibrations completely go away until i let off the gas .
  15. Kylebr1
    Anyone notice that there vibration goes away depending on what gear the transmission is in ? i was on the highway this morning and at low throttle high gear i would get a vibration but at high engine rpm and a lower gear the vibration would temporarily go away .? anyone notice this or just me ? same vehicle speed .
  16. Kylebr1
    4x4 double cab 5.3 . I am going to bring my driveshaft in to check for balance next too see if i can 100% fix my issue .
  17. Kylebr1
    Part # YAG15812663
  18. Kylebr1
    95% Vibration free center console will shake just the lightest at 115kmh plus now and i can no longer feel a vibration in the floor . I am thinking one of my back tires may be slightly out of balance i am going to try rotating front to back see if that fixes the last little bit of shake .
  19. Kylebr1
    Just put my Yukon axles in yesterday so far the road feel is completely different it's really hard to explain . Going to work tommorow so I will finally be able to get the truck to 110kmh plus speeds to see how it is . I'll let you know if this fixed my issues .
  20. Kylebr1
  21. Kylebr1
    Yeah i had called the dealer and there part # in the last year has changed on there rear axles for the 2014 plus sierra silverado . Which makes me think they have since put a upgraded part into there system .
  22. Kylebr1
    I haven't had time to read through all 800 plus pages of this thread to see what everyone has said but i thought i would give my feed back . I have a 2016 sierra elevation WT 5.3 4x4 double cab 5.3 . I started by leveling my truck 2.5" no vibrations had stock wheels 20" with Michelin tires . then i put a lift block in the back of my truck 1" taller then factory was a readylift unit again no issues no vibrations . Next thing i did to the truck was put bigger tires they were firestone 34" tires that is when i first noticed that it had started driving different . Thought it was something to to with pinion angle . so i took the rear blocks out put the factory ones in without any change .. Next thing i did was have the tires re-balanced had this done twice with the firestones no such luck . bought some Amp tires made the vibration 100% worse had those re-balanced 3 times then finally had them take them back and got new rims xd bully wheels in 20" and 35" toyo open country tires . Center console shake almost gone id say 90% . all in all i finally took a look at the rear axles because my vibration was changing depending on the different wheel setups i had tried sure enough the axle flanges are way out of round and are not true as in straight . i am hoping to have my Yukon replacements soon . Also i tried putting air shocks in the rear and adding air pressure to see what would happen vibrations got a lot worse with added psi and better with less to no psi .
  23. Kylebr1
    Anyone replace there axles with these new Yukon ones and had good luck ?
×
×
  • Create New...