colonel00

Thanks for the replies. I tried to get to where I could see but it wasn't working so I bit the bullet and just removed the whole headlight. Not too difficult except for that fourth bolt that's behind the wheel liner. I did clean as best I could and retaped with some 3M tape. One tab didn't look like it was doing too well but I think it should hold. The old tape had pretty much come undone by itself.

Looking for some input and guidance. The bezel on the passenger side headlamp has come loose and when I try to push it back it doesn't seem to snap back and stay put. The next time I drive it is loose again. I'm assuming there's a broken tab or something but the bezel is still attached at some points so I can't really see what's going on. I have tried to look up some videos but they usually talk about removing the whole headlamp assembly. Anyone have any experience with this or suggestions on a minimally invasive way to fix this? The other kicker is I have Iridescent Pearl paint so finding a replacement will be tough.

Covers are sold Sent from my SM-G973U1 using Tapatalk

Yup still do. Shot me aPM Sent from my SM-G973U1 using Tapatalk

Bump again. Never heard from the previous interested folks.

Send me a PM. If you're interested in the full set, we can work out the shipping.

Bump again. Somebody needs to refresh their interior. Make me an offer or I might be interested in a trade. Always interested in evil black firearm parts. Maybe a truck accessory of some sort.

Definitely 6112's. Post a link when you find them Sent from my SM-G930P using Tapatalk

Don't forget the two smart watches she bought too

Katzkin cover for the jump seat is sold. Just bumping this up for the rest of the cloth seat covers. Let me know if there is any interest. We can work out price and shipping.

Please do. I haven't gotten a light bar yeat because of the active shutters.

Are you replying to me? I'm not complaining about anything. Just trying to let folks know that wireless charging that I have in my '18 is "meh" at best. You are quite correct, expecting GM to allow you to charge your phone in your pocket is silly. In fact, suggesting it is quite asinine. As is the idea of a mobile device performing Android Auto and Apple Carplay simultaneously. However, wireless Android Auto or Carplay is a reality and could be implemented. I didn't ask GM to make a phone for me, just hoping someone can find a way to get my antiquated tech up to today's technology.

I have to agree to a point. My '18 came with it and I guess it's nice to have but it's soooooo slow. Yeah, when I'm out running errands, I just set the phone down on the pad between stops and it gets a little charge which is nice but nothing that is noticeable really. For longer trips, you will get a decent charge but I agree that at that point, you might as well just plug it in. I only use Android Auto on longer trips so again, the wireless pad isn't really used then. I guess my point to others trying to add wireless charging is, depending on the cost, it might not really be worth it. Maybe find a nice phone mount with integrated charger or something like that. If you just want a cool mod, go for it. Just don't expect charging miracles out of it. Now, if someone can integrate a fast wireless charger, that would definitely be worth the investment to add this to a truck that didn't have it. I'd also be interested in adding a a second charging pad for the wife but I don't know where I'd even put it. Maybe in the upper glove box?

Maybe you could give a synopsis for those that don't want to watch a video?

I did my Katzkins myself. Just takes a bit of time and patience. Take your time, especially with the front seats as you don't want to break tabs that hold the seats to the foam. There are a couple videos on Youtube that will be of assistance as well. I'd suggest starting with the back seats and then move to the fronts. It's been a couple months now but I'm happy to answer questions if I can. Regarding the jump seat, I have a center console so I can't be of much help there unfortunately. Also, if you wait, ebay runs coupon codes for 15% off the entire site. Wait for one of those and you can get a full set for under $500 shipped which is a great deal really.

If you got the set of 4 for $297, I don't think you got the height adjustables for the front. You might double check what you ordered. Sent from my SM-G930P using Tapatalk

Yeah, search by the actual part numbers. Sent from my SM-G930P using Tapatalk

Well, from my understanding and from the video above, the Eibach gives a 2.5" level at the lowest setting. If you only want 1.5-2" then I think the Bilsteins will be a better solution as they go up to 1.85" if I recall correctly.

Plastidip? Or get it sprayed with bedliner? Plastidip will be removable so at least you could try it out and make sure you liked it before committing to a permanent solution. Or just send them to me and I'll swap with my off road step bars

Do you have a link? When I look them up, I'm getting a price of $375. Granted, I'm looking the shocks up individually. Are you talking about a package deal? I do see one for under $300 for 4 5100 shocks but they aren't the height adjustable I don't think.

Those are pretty slick. By "custom made" did you make them yourself or get them somewhere? If you got them I'd be interested in some additional info please.

I have Katzkin leather covers for a jump seat that I'm looking to sell. I replaced my cloth seats with Katzkin but I already had the center console so the jump seat cover is unused and needs a good home.

Ok, photos are uploaded at the link below. Let me know if there is something specific you want to see. As mentioned, these were barely used before I pulled them off. I can't find any signs of wear. Might have a couple pieces of grass on the backs from being laid out in the garage https://photos.app.goo.gl/cX7LWL9eMNvDSuPq8 Looks like shipping via UPS or Fedex is the cheapest at $37-39. USPS was something like $52. If you wanted to pay via Paypal (for goods and services) then the shipping might get a discount via USPS but I'd ask for a few more bucks to cover the Paypal fees. Not sure that I can lighten it up much more or reduce the size.

Crap, totally forgot to take photos but I will here now. I'll also look up a shipping quote. I will actually be travelling through SeaTac Wednesday morning and again Thursday evening. I don't have too long of layovers though and I'm not sure if get the seats to fit in a carry on due to the long plastic clips, especially on the rear seats. The box is 20lbs 10oz including the Katzkin jump seat and 18lb 4oz without. Were you wanting the jump seat as well or just the cloth seats? Photos and a shipping quote coming shortly....

Is there a part number for these? Trying to search with just keywords seems to bring up so much random crap but I'm not finding these.