CajunFries

Look up ”boosted Gen V LTX truck” on Fb. Tons of info on there. But you’ll need low side for sure. Hit up Jose Zambrano. He’s the mod for that page. He make and sell direct replacement low side. I think he have flex flue sensor kit available also. Without LT4 stuff, you’ll probably be able to make about 525hp before running out of fuel. With LT4 high side, you’ll probably be able to take it 800+. On E85... I think it’ll limit you to about 650 I think. If you’re looking for a tuner, look up New Era Performance. He’s probably the best in west coast. Here’s my truck getting dyno. [emoji482][emoji482] Sent from my iPhone using Tapatalk

They said that came straight from GM like that. They did not open or tampered with it at all.... [emoji848][emoji848][emoji848] I guesssssss.... oh well. Imma just throw some nail polish on it and hope it doesn’t keep chipping off and throw them on!!!!! Can’t wait either! I’ll try to get them on this weekend! Sent from my iPhone using Tapatalk

Everything for the brake swap is finally here! However..... the left caliper looks like it was repowder coated or shitty prep and its chipping off. Just emailed ZZPERFORMANCE (where I got the calipers from) and see what sup with that! Sent from my iPhone using Tapatalk

Go on rock auto.com. It’ll give you exact PN Sent from my iPhone using Tapatalk

Hahahaha I’m about 19.5-20k in just parts into my truck... 6k was spent on this Friday..... all she knows is that I just got cam and DOD delete... this year.... lmao. And last year I just did exhaust..... Don’t floor it when she’s in the car lmao Sent from my iPhone using Tapatalk

If you got some $$$ check out “showstoppersoffroad” ok IG lots of highend off-road wheels. They are mainly for Toyota’s but they use same lug pattern. I would run them but I wanna stay 20” for my stickier street tires. Sent from my iPhone using Tapatalk

Lol with how much I’ve spent on “mods” on this truck.... I can almost pay off the truck.... Methods are cool but too many people have them. They are too played out. Rather have some ice factory wheels and some 1”-1.5” spacers. Sent from my iPhone using Tapatalk

At first I was really against the blur calipers.... because my truck is Maroon with bronze wheels.... BUTTTTT I saw this ... SOLD and that’s just a regular Disney annual pass card. Sent from my iPhone using Tapatalk

Thank you! Yup! 20” or bigger. Reference picture Sent from my iPhone using Tapatalk

It should! It said minimum 20” wheel. If anything I might just need a small space to clear the caliper’s face. Can’t wait to try it! Sent from my iPhone using Tapatalk

Waiting for brake lines, rotors and a line lock solenoid. Sent from my iPhone using Tapatalk

Replacement AFE filter came in couple weeks ago. Finally get to take the k&n off (only filter that’ll fit from what local Autozone have). K&N is nice but let too much fine particulate through. Sent from my iPhone using Tapatalk

Diablo Trinity 2 EX for sale. Tuned the truck twice and the rest it was sitting unplugged in the glove compartment. Model #9246. The originally screen protector is still on and never been peeled off. Except the top left corner started peeling just a little. It is unmarried. Will come with the cord. $520 shipped in US. You pay PayPal. Sent from my iPhone using Tapatalk

Anyone interest in some ICT BILLET valve cover? Will fit Gen V LT both 5.3 and 6.2. Brand new, open box to test fit. Will come with -12 AN fittings, gaskets and bolts. $320 shipped. Sent from my iPhone using Tapatalk

Granatelli wires went on Pardon my dirty engine bay.... Sent from my iPhone using Tapatalk

Can’t go wrong with a 16.1” rotor and huge calipers!!!! Was either gonna be ZR1 setup or Wilwood Aero6 setup. Both are slightly under 2k. Sent from my iPhone using Tapatalk

Bought a bunch of parts for the truck!!!! Here’s the list!!! ZR1 blue front calipers 16.1” rotors Hawks 5.0 pads Granatelli wires Fresh set of plugs Tru-cool 40k Mobile 1 fluid Will post pictures as things start coming in and installed! Sent from my iPhone using Tapatalk

Bull Ring Bullet Inner Bed Retractable Tie-Down Anchors (9 Pack - Complete Bed Package) | '07-20 Chevy Silverado and GMC Sierra | '15-20 Chevy Colorado and GMC Canyon | https://www.amazon.com/dp/B00TOUP7OQ/ref=cm_sw_r_cp_api_i_lqLHFb9VZ0TAX Sent from my iPhone using Tapatalk

With quarter tank of gas. I weight in between 215-220.... [emoji2377] Sent from my iPhone using Tapatalk

I’m crew cab standard bed. I carry tools with me to work everyday. Also have a box in the back with straps. Wheels and tires are 89lbs each corner I believe. That’s all I can think of. But I do have scale at work. And I weight it in last week. 6080lbs I believe it was. 6100lbs to make it easy with like 15/16 tank of gas.... I’ll take a picture of it next time I have a full tank of gas and actually remember to get on the scale. Sent from my iPhone using Tapatalk

Heads and cam 6.2 would be a nice DD Sent from my iPhone using Tapatalk

Heads and cam 6.2 would be a nice DD Sent from my iPhone using Tapatalk

I mean you don’t have to do everything I did..... you can just do the whipple kit. You won’t be making allll the power but more than stock. I did a bunch of other things so I can make more power Sent from my iPhone using Tapatalk

I’m only 2wd. Wish it was a 4wd, SMH. Crew cab standard bed. 6 speed 3.42 gear. Nitto NT420S 285/50/20. 1st is useless, it’ll spin the first half of 2nd and hooks at about 40 something. Truck weights in at 6100lbs with full tank of gas and me in it. Sent from my iPhone using Tapatalk

I did everything myself except the tuning and custom exhaust pieces. I think I’m in it about 12k. I stop counting. It hurts hahaha Here is the parts / price list. Blower 4200 Headers 450. + $120 for shipping O2 extension $40 ARP exhaust bolts $32 Meth kit $700 / extra hose & nozzle $140 VP M1 $40 (every 2-3 weeks) Cat $400 / muffler $160 / resonator $110 / Vbands $120 Block8head gauge pod $200 Spark plugs $60 / boots $20 160 thermostat $40 Smaller pulley $50 / belt $30 Hpfp lash cap $11 VAS traction bar $414 AFR gauge $185 / boost gauge $95 stabilitrac switch $80 Exhaust manifold gasket $14 Valve cover breather $75 Vibrant catch can $130 hose & fittings $50 Driveshaft loop $100 Driveshaft $800 walbro Fuel pump $110 Tune $750 K&N 0870 $85 Filterwears $30 CF 4” intake setup $210 / MAF adapter $30 LT5 TB $220 & adapter $55 Header ceramic coated $250 Smooth boost $900 Exhaust labor build $70 $250 $100 Sent from my iPhone using Tapatalk