GCBC

im ordering the rears, undecided between external res version and the regular version.... NEED fronts to match, don't want to have to take them to a shop to get the springs compressed since I dont have a compressor. so id rather just swap the entire coilover unit. would like to raise front an inch solely to squeeze on a 35in duratrac and do some trimming. dont want to get control arms or anything else either.

Can I put a 2020 LTZ wheel on a 19 TB custom? Don care that the extra buttons won’t work just want the leather wheel. Would like the cruise to work tho

ok so with the 35in tires on the TB and this 1.5in level kit, are you not removing the mudflat bracket and trimmer the liner and mud flap? im about to pull the trigger on new wheels w/35.1in duratrac's once I know I can either run w no front level kit and just trim the mud flaps and liner a little. the wheels im trying for a +20 offset 18in compared to the stock +26 offset should be basically the same

have a 19 trail boss custom and would like a leather wheel for it asap! if the volume controls will plug into a preexisting and unused harness behind the wheel that would be great!

also need to know. truck front and rear desperately needs a huge amount more rebound dampening and slightly more compression dampening. say 80% more rebound and 50% more compression. would hugely fix the spring only effect it suffers from.