Jump to content

TX_MattyIce

Member
 View Profile  See their activity

  • Posts

    20

  • Joined

  • Last visited

 Content Type 

Everything posted by TX_MattyIce

  1. TX_MattyIce
    What kind of lift or level are you running?
  2. TX_MattyIce
    Minor trimming of the liner
  3. TX_MattyIce
    Not to bad. I trimmed the liner just because my drive way is steep.
  4. TX_MattyIce
    2015 with a 2.5 leveling kit and rear is stock, 17in methods with 285/75/17 falken wildpeak at3w.
  5. TX_MattyIce
    I’m gonna say about 33.5 inches
  6. TX_MattyIce
    Idk why the pictures flip but that’s where I cut. Today I rubbed a little while backing out of my driveway and turning the whee all the way. I’m sure if I cut the felt up a little higher I would rub but I’m not. I spray painted the metal tab I cut and hit the edges up.
  7. TX_MattyIce
    Yes I did trim but I didn’t really need to. I’ll upload a picture tomorrow.
  8. TX_MattyIce
    Yeah the felt liner and plastic cap. I cut the cap right before the screw that’s there. Also there is a metal tab I cut that’s behind the felt. I didn’t know if they would fit without trimming so I did it before I put the tires on. I just used a dremmel. I’ll upload another pick of my cutting tomorrow.
  9. TX_MattyIce
    2.5 in leveling kit with 285/75/17 methods with falken wildpeak at3w
  10. TX_MattyIce
    Finally put on my 17in methods with 285/75/17 falken wildpeak at3w on my 2015. I have a 2.5 in leveling kit and rear is stock. Didn’t really need to trim but I did for ease of mind.
  11. TX_MattyIce
    I just put a 2.5 in leveling kit on my 2015. Do y’all think I’ll have to trim to try and fit 285/75/17 with methods?
  12. TX_MattyIce
    Did you have to change your Upper control arms with the 2.5 in up front?
  13. TX_MattyIce
    What set up are you running? Leveling kit? Tire size?
×
×
  • Create New...