Texas Husker

That's what I've read as well. Might be worth a shot for 140. Worst case, I have to send it back. Sent from my SGH-M919 using Tapatalk

Anybody put a 07-13 Tonneau on a '14 yet or attempt to? I want to get the Bestop ZipRail: http://www.bestop.com/component/products/?view=product&id=16 My friend has had his for years and it's held up really well and very water tight. It's the same way they make bikini tops for Jeep's. I like that it's not velcro or snaps. They have it listed for 07-14. I called and asked about the bed size difference and if a new one was coming out for the '14 1500's. She said it says new body style next to the 07-14. I told her the bed dimensions are not exactly the same and other tonneaus don't fit properly. She had no idea. I emailed their tech support and they responded with the same model number for 07-13 for the '14. I replied to them with links showing the bed dimensions for '13 and '14 are slightly different. Waiting on response still. Mine measured 63.75" up front inside to inside and 61.5" at tailgate. My dad's ('08) was just under 64" and 62" front/back. My only concern would be if the front C-clamps would still hold the rails securely. Long story short, the tonneau is on sale on Amazon for 189.45 and there is a 50.00 mail in rebate. 139 for a tonneau is tough to pass up. I know the soft roll ups aren't everyone's style, but 140 is a damn good deal. Anyways, Thanks in advance. Link to amazon: http://www.amazon.com/Bestop-15211-01-Silverado-management-2007-2013/dp/B0032H33WK/ref=sr_1_1?ie=UTF8&qid=1400901311&sr=8-1&keywords=bestop+15211

Is this your current setup? how far out do they stick? Was the body lift required for this setup to clear? Thanks in advance. Really like the deep lip the x10's give.

Sounds like they should just swap them out and send you new idler linkages. That's a pretty bad gap. Is there a lot of play in the idler? mine was fairly stiff. When held in my hand, it would drop to fully extended under it's own weight, but slowly.

I didn't use the new plug and play, but the video showed they have a spliced connector with an additional OBD Port so you can still use your range or hook up a scanner. It has a couple mounting points so you can mount it under the dash next to the current port. Not sure if the splice is standard equip or additional. I'd think if they take up your port, it would be standard. I know a couple of guys have ordered it and will hopefully chime in.

Thanks. That's the response I got as well. Unfortunately, for me, I can't get the bundle as mine are on the floor now, but I'm going to hold out and see about pricing. If it's not too much, It'll be easier to go that route.

I emailed AMP earlier about this. Will post back when I hear back.

It seems the consensus on install is 3-4 hours, Depending on experience of course with familiarity of panel removals, and basic wiring. Mine Just got delivered today. If I get some free time this weekend, I will be doing the install and taking notes and pictures.

Back-orders have finally shipped. My Amp's should be here Friday.