Jump to content

skennel23

Member
 View Profile  See their activity

  • Posts

    136

  • Joined

  • Last visited

 Content Type 

Everything posted by skennel23

  1. skennel23
    They are the fuel mavericks 20x9. They come in either +1, +14, and +20 offsets. I figure with a 3" kit I should be able to do a +1 offset
  2. skennel23
    I have a 2014 2wd and I think I am going to go with a 3" level in the front and 2.25" block in the rear. Should I go with a 1 offset rim or 14 offset? Tires are gonna be 305/55/20 terra grapplers.. im not sure if a 2wd and 4wd are different heights in the front so the 3" might give me that little extra to clear a 1 offset. What do yall think?
  3. skennel23
    Anyone have any input on the Rough Country 3.5" lift for a 2wd?
  4. skennel23
    Im about to do the RC 2.5" lift/level. Im going to with a 275/60r20(33x11) on either fuel mavericks or some rockstars. The mavericks are offered in a +1 and =14 offset, and the rockstars are offered in a +10 offset. My question is would have a problem fitting any of these wheel tire combo? any idea what offset I should stay around? thanks for any input!
  5. skennel23
    Has anyone done a straight pipe set up with a y pipe out to 2 tips in the back. Haven't seen this on a 2014 yet.
  6. skennel23
    Finally got everything work right, it was power issue. Now aiming these headlights I adjust them two turns clockwise, correct?
  7. skennel23
    Yea I know I'm going to do a projector swap. I had projectors with 55watt HIDs in them in my last truck (nissan titan). The light output was amazing..
  8. skennel23
    Ok I am going to try again tomorrow, I think it is a power issue so ill try this. Thanks for the picture and input. Much needed ha
  9. skennel23
    where did y'all ground your harness at? I had my grounded to the battery.
  10. skennel23
    Yea I checked all of that. I hooked the ballast straight from the power coming from the truck and still had no power. I'm going to mess around with it more tomorrow.
  11. skennel23
    I tried plugging them in every way possible lol
  12. skennel23
    Ok so I got my DDM lights today and went and tried to install them and got nothing! I tried every way in creation to get these things to work and I didn't get so much as a flicker. I have the 35watt kit with the relay harness and the capacitor. I even tried to hook these up coming straight off the factory lights. I checked all the fuses and they are fine, I put my stock headlights back in and they are working just fine. I've had HIDs in all my trucks and never had this problem. I have no clue what to do. Any advice other then return them and try a better kit like morimoto?
  13. skennel23
    I am fixing to the do this mod. I ordered the aluminum extruded lowering blocks like somebody had done, but somebody else had a problem with them not fitting? Can anyone elaborate?
×
×
  • Create New...