Jump to content

sawyer_dowell_3

Member
 View Profile  See their activity

  • Posts

    176

  • Joined

  • Last visited

 Content Type 

Everything posted by sawyer_dowell_3

  1. sawyer_dowell_3
    I was running 295/60/20s and still rubbed at full lock with some trimming.The kit itself was a good kit and could complain. i did have coilovers custom built for the kit so that helped out on the ride. I just traded my truck last week lol.
  2. sawyer_dowell_3
    Hey man,i think it's a Fusion Bumper. Check them out Sent from my VS986 using Tapatalk
  3. sawyer_dowell_3
    i didn't think the stock wheels would fit with the different knuckles... guess im wrong lol
  4. sawyer_dowell_3
    lol how did you fit 35's on yours!? im running 295/60/20s and those rub... i have -12 offset wheels though, so im assuming thats where its at
  5. sawyer_dowell_3
    I looked back in a thread that i made about my lift and the measurements were 43" in the front and about 43.25" in the rear
  6. sawyer_dowell_3
    I have the Zone 4.5 but i dont have any pics next to a stock truck... I'm 6'2 and i can still get in it pretty easy without steps. But i do have the amp research steps and they come in handy. a pic will be in my signature. but im very pleased with this lift and think its the perfect height!
  7. sawyer_dowell_3
    im running 295/60/20 right now with rubbing at about 3/4 turn in reverse. would i be able to fit 285/65r20s since its taller but more narrow??
  8. sawyer_dowell_3
    Never mind, I got it. Thanks though! Sent from my VS986 using Tapatalk
  9. sawyer_dowell_3
    Okay I think I got the bulb seated correctly. Do you need to remove anything to get to the adjustor screw? Or is it visible? I need to bring the driver side cutoff up Sent from my VS986 using Tapatalk
  10. sawyer_dowell_3
    I just installed some diode dynamics hids and these are the first ones ive actually gotten to work on my truck. i need to adjust my cutoff and ive heard there is a way to adjust come screws to move them up and down. Could explain to me how to do that? also, i got 6k color and the passenger side looks it but the driver side looks about 4500k. is possible that the driver side need to be positioned a different way in the housing??
  11. sawyer_dowell_3
    I have the zone 4.5" lift with 295/60/20s. pic is in my signature
  12. sawyer_dowell_3
    i'll have to agree with the guys above. i like it better without the z71 emblem. loving that new grill though!
  13. sawyer_dowell_3
    dannnggg... lol i'd say you got me beat there! Just glad the boat wasn't damaged too bad!
  14. sawyer_dowell_3
    tell me about it! but if the estimate is high enough i might just take that money and put it towards a SCA G2 bumper so it might work out! haha
  15. sawyer_dowell_3
    it was a she the thing that pissed me off the most was that i laid on my horn for a good 2 to 3 seconds before she hit me! just not paying any attention what so ever, thats what made me the most mad
  16. sawyer_dowell_3
    i'm kinda like you, their insurance will cover it. but honestly, im surprised i didnt get out of my truck in a rage, even over something so small. no one was hurt and it wasnt a big deal. they had insurance so it'll get fixed and everyone moves on lol
  17. sawyer_dowell_3
    Got backed into today. Nothing major but just enough to pass me off. Scuffed the bumper pretty good and knocked out one of my front sensors
  18. sawyer_dowell_3
    Why not just go with the bds 6" lift? Lol
  19. sawyer_dowell_3
    Well i started out with the strut spacer but later on got rid of the spacer and had custom coil overs built. handling was just fine and rode about the same as stock with the spacer. i can tell i difference with the new coils though on the rough stuff. if i could go back i would have started with BDS b/c of the new struts but they didnt have that option when i was looking though
  20. sawyer_dowell_3
    I've got the Zone 4.5 and its done very well. no problems out of it. I dont have any pics of the angles right now though. i'll try to get ya some
  21. sawyer_dowell_3
    Icon vehicle dynamics can custom build their shocks for whatever length you need. I had a custom set of coil overs built for my truck with a 4.5 inch lift. Pm if you want some details
  22. sawyer_dowell_3
    Congrats my man! I know you've waited a long time for that and you've done your homework. Looks greats!
  23. sawyer_dowell_3
    I have the Zone 4.5" lift and i run 295/60/20s. a pic will be in my sig... maybe that'll help. if i remember right the measurements on the tires are 33.9 x 11.8
  24. sawyer_dowell_3
    Thank you! They were pricey but looks sweet and ride great! sdhq off road was who I went through to get them. The guy named Louis was awesome to work with. Strongly recommend them in you need a custom setup
  25. sawyer_dowell_3
    Upgraded my Zone 4.5" lift last week. I had some custom built Icon Vehicle Dynamics coilovers and put on. Along with IVD UCA's. This removed the strut spacers. Rides about the same as stock on the road, but on off road and bigger bumps just eats up the road and is much better! No more bouncing around, truck just feels planted to the ground!
×
×
  • Create New...