A.J. Curtis

Yes the 2014 and 2015 Sierra use the same 9012 head light bulb. It is a combo Hi/Low beam bulb.

What are you looking for? the install was pretty easy but I highly recommend having a helper so everything stays where you want it when you tighten everything down.

I got my Cam from pop and lock and finished the install. I used your advise Crewl1 and it works perfect! Thanks for all the help everyone!

I have not had that problem at all! Hmm I wonder if they have everything hooked up right? Maybe check the fuse from the Digital processor/amp? My stereo is loud as heck and I'm a deaf drummer LOL

What bright 7444 LEDs can I get for front and rear turn signals that do not require a load resister spliced in?

Before installing everything I was definitely considering upgrading the dash speakers but everyone who has installed the complete kickers Vss powerstage package says the same thing. With the complete package you finally can hear the dash speakers. I was never able to really hear them before so I was going to install the kit and see what happened. I am very happy so far with the stock dash speakers right now. My coworker changed out his GMC Sierra door and dash speakers to really nice components with the tweeters in the dash. I personally did not like the sound with the tweeter that far back in the dash it felt like it was lost. The only speakers I am considering right now are the GM/AC Delco Bose speakers that are close to $90ea and will fit with no modification to the truck. All of the other aftermarket options I have found require modifications to fit because they are deeper with larger magnets & I personally am not going to cut up any of the truck as I will most likely get rid of it in a few years.

That's good to hear, I'd hate to just keep sending lots back until I got one with a cam lol.

I had the same problem! My lady got me one for xmas and my folks did too. I planned on returning one but when I went to install it today neither of them had the pop and lock cam! I emailed pop and lock and hope to hear back from them when they return to the office on Monday.

I will! I looks like they will ship after the new year and I will install them ASAP!

I finally ordered the Go Rhino RB10's! I can't wait for them to arrive!

I could not find anyway of buying the amp/processor by its self but I would just contact Kicker and see if they would!

I installed the Kicker VSS Soundstage with the 32 bit digital signal processor/4 channel amp model #19303117 $850 shipped via Amazon I also upgraded the front and rear door speakers. The front doors got Kicker KS seires model #KSC693 which are 3 way 6x9 4ohm speakers. The back doors got Kicker KS series model #KSC67 which are 2 way 6-3/4" 4ohm speakers 2 way 6-3/4s $210 via crutchfield. I am extremely happy with the upgrade!!! I highly recommend getting the complete Kicker VSS soundstage package. You can actually hear the dash speakers?

I think that looks perfect! I am getting mine installed Monday and think I'm just going with the highest setting.

That is awesome info! Thank you!

It is not easy unless you have a spring compressor. You have to remove them, compress the spring re-install them and then get a new alignment each time you change the setting. It is not like a traditional adjustable coilover. But even with those you would need to have a alignment.

Ok ladies and gents. I need some help on which setting to use. I have a Crew Cab 6.6ft bed with a Leer shell. Right now with my stock 17" wheel and tires the front lip of fenders are close to 36" to floor and the back lip of rear wheel well is 38" to floor. I do not want the rear to be lower than the front and I plan on installing the Air Lift load lifters out back in a few months. knowing this should I just go all the way to the 4th notch for the 1.85" lift? What do you all suggest?

Thank you thrasher2010! I have a leer shell with a Thule accessory rack and thought it would be easier to access it with the pop down step + it might look sportier than a wheel to wheel step.

Great idea! I can't wait to see what the results are!

Has anyone upgraded the front and rear door speakers with the the complete Kicker soundgate upgrade that has the signal processor?

You folks with the Go Rihno RB10's steps do you think there is room to add either the AMP 75407-01A Bedstep2 or the GM 22799283 Bed Step? http://www.amazon.com/dp/B00GA71QVE/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=2IWH6IQBA53GN&coliid=I3TR9FCYPO6793 http://www.amazon.com/dp/B00FMUZ26K/ref=wl_it_dp_o_pd_S_ttl?_encoding=UTF8&colid=2IWH6IQBA53GN&coliid=IDBZBK8HVOP0X

Thank you so much for the info WendysOrBust! I ordered the Bilsteins the day after I got the truck and can not wait to install them and get some real rubber under there too!

Ok, I need some help! I want to upgrade my stock 2015 LT headlights. My headlights do not have projectors in them and they are standard bulbs. see photos below. I was looking into the fastheadlight FXR kit but just don't trust myself messing with the housing. Is there a California Street legal HID kit I can install? Would the Morimoto Elite HID Kit work for me in the stock headlights I have? http://www.fastheadlights.com/ProductDetails.asp?ProductCode=buy_hid_kit Thank you!

Thank you for the response!! So if I wanted to do the FXR conversion what else would I need to have to complete the install if I ordered this kit? http://www.fastheadlights.com/ProductDetails.asp?ProductCode=fxr_chevy_retrofit-kit

I am totally new to this and want to do the fxr upgrade on my 2015 1500 LT Silverado. You mentioned that it is easier for the Silverado install? could you elaborate why it would be easier? Would I not have to open the light housing to install them?