Jump to content

p7m89mm

Member
 View Profile  See their activity

  • Posts

    68

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by p7m89mm

  1. p7m89mm
    They've been very solid. I originally added clearbra about 10" up the rocker to the first body line since I'm not running mud flaps. The boards have worked great for protection. Probably don't need the clearbra. Sent from my iPhone using Tapatalk
  2. p7m89mm
    Go Rhino RB10 Sent from my iPhone using Tapatalk
  3. p7m89mm
    My son had his second birthday and got a matching truck! Like father like son I guess! Sent from my iPhone using Tapatalk
  4. p7m89mm
    Hard to say. Temps have been below freezing so I'm generally getting less mileage. Truck barely gets warmed up by the time I get to work and roads are icy so I'm always running in Auto. Haven't been on the freeway much and foot is also a little heavier these days ;). Once it warms up I'll have a better idea and I'll be able to play around a bit more. Sent from my iPhone using Tapatalk
  5. p7m89mm
    I'm not sure what code was actually pulled from my vehicle resulting in the pump replacement. Sent from my iPhone using Tapatalk
  6. p7m89mm
    Yes. I've see a few different pictures online. The one in this before and after from another user on the site is it... Sounds pretty throaty. It does give me a little drone (helicopter sound) at certain RPMs. Only when accelerating in v4 at low speeds though. Sounds fine on the freeway. Sent from my iPhone using Tapatalk
  7. p7m89mm
    Late December. Truck has been running perfect since. I had them install the GM performance intake at the same time ;). It's a great match to my GM/Borla exhaust! Sent from my iPhone using Tapatalk
  8. p7m89mm
  9. p7m89mm
    Mine failed recently. Same "Engine Power Reduced". Dealer replaced the pump. Sent from my iPhone using Tapatalk
  10. p7m89mm
    Found myself on the side of the freeway yesterday with a check engine light. Ended up being the high pressure fuel pump. Sent from my iPhone using Tapatalk
  11. p7m89mm
    I have a 2016 5.3 8 speed with about 9k miles. Headed to the dealer next week. I've loved my 8 speed thus far. Some minor issues, but nothing that bugs me. I've recently had two shudder events. Both accelerating our of a corner and the truck won't shift and starts shaking terribly. Roads were getting icy so I was running in Auto 4wd. At first I thought it was traction control, but no light and too violent. Anyone else have this type of shuddering upon acceleration? Feels almost like a manual transmission stuck in a high gear bogging down. Sent from my iPhone using Tapatalk
  12. p7m89mm
    Is the slipping and flaring that's discussed the same that has been reported when slowly exiting a turn or hill starting? Sent from my iPhone using Tapatalk
  13. p7m89mm
    I have the Readylift 2.25" with Method NV 17x8.5 0 offset and 285/70/17 Duratracs. Only a very very slight graze of the felt wheel liner in reverse at full lock. With 2.5" you will be fine. Sent from my iPhone using Tapatalk
  14. p7m89mm
    Sent from my iPhone using Tapatalk
  15. p7m89mm
    Finally got mine clean. Readylift 2.25", Method NV 17x8.5 0 offset, Duratrac 285/70/17. Sent from my iPhone using Tapatalk
  16. p7m89mm
    Function is great. There's a nice platform especially getting out of the truck. I mainly bought them to save my seats when jumping out and for rocker panel chip protection. The step is great though. Btw, I have a 2.25" level and 33s. Sent from my iPhone using Tapatalk
  17. p7m89mm
    Ha. I removed a post I made. I was having a very hard time getting the driver side straight. The board was twisting - flat at the front and angled out towards the back. I took it off and put it on the ground and it was still twisted. Went so far as calling the seller about a return. Then, I put a level on each bracket. For some reason the rocker is just not level. Ended up shimming the brackets to make it all level and it looks great now! Sent from my iPhone using Tapatalk
  18. p7m89mm
    Removed.
  19. p7m89mm
    A lot of pics. My OCD got to me and I moved them in 1/2". Sent from my iPhone using Tapatalk
  20. p7m89mm
    Here you go. Front... Back... Sent from my iPhone using Tapatalk
  21. p7m89mm
    Mine are out about all the way. I bet there's a good 1"-1.5" adjustment inwards. I just lined it up with the rocker. I might adjust them in a bit. Sent from my iPhone using Tapatalk
  22. p7m89mm
    Here's another dirty one... Sent from my iPhone using Tapatalk
  23. p7m89mm
    Installed my RB10s. There's a lot of adjustment in and out. I tried to line them up with the rocker as best I could. Sent from my iPhone using Tapatalk
  24. p7m89mm
    Just got my lift done two days ago and wheels and tires done yesterday. 2016 All Terrain. Readylift 2.25" with Method NV 17x8.5 0 offset wrapped in 285/70/17 Duratracs. No rub. Rear mud flaps, Go Rhino RB10s, and GM/Borla exhaust are ordered. Quick cell phone pics... Sent from my iPhone using Tapatalk
  25. p7m89mm
    How tight are the Go Rhino Rb10s to the rocker? We have a lot of snow around here and I don't want the boards holding anything against the rocker to prevent rust. Thanks!
×
×
  • Create New...