THE_Engineer

Truck looks good, almost looks taller than a 4". Whats the measurement from ground to bottom of fender?

3.5” lift and no issues. Has a 2” drop diff and ready lift uni-ball control arms.

My 2015 Sierra with stock all terrain wheels

no I have not found any pictures yet

I am looking for pictures of wheel spacers on GMC stock rims. I am debating on putting some on and just wanted to see what each size looks like (1" 1.5" 2") thank you

I am running 35x11.5 Nitto ridge grapplers on 2.5" RC leveling kit. I trimmed the wheel liner and it doesn't scrub anymore except on full lock it does hit the sway bar.

Yes, I say lift kit because i have always thought a leveling kit is something that just raises the front of the truck and not the rear. I am running the rough country 2.5" leveling kit with the rear blocks installed. I do a good bit of highway driving as well and i am averaging around 16 MPG. I also took off the front air damn which some people says effects MPG as well.

Yes you can fit a 12.50 wide tire. You will scrub the sway bar at full lock but its easy to avoid and there was defiantly a big height change with the tires.

Yes you can fit it if you do some minor trimming on the wheel liner. Tires will rub the sway bar at full lock but its not bad

Yes I can post those pictures later this afternoon.

it rubs the sway bar at full lock. I cut the inner fender liner so there is no rub there

Here is the truck at stock height with stock tires Here is the truck with only the rough country 2.5" lift and stock tires Here is the truck with the 35x11.50 Nitto Ridge Grapplers installed

Rough Country 2.5" and 35x11.50 Nitto Ridge Grapplers