Jump to content

Tleesmith14

Member
 View Profile  See their activity

  • Posts

    85

  • Joined

  • Last visited

 Content Type 

Everything posted by Tleesmith14

  1. Tleesmith14
    So I ended up going with the ridge grapplers in 285/50/22. Just have the rough county 2” up front nothing in the rear. What pressures are y’all running? Tire shop has mine set anywhere from 35-39 seems low for the load e tires
  2. Tleesmith14
    Looks great I got very similar truck except Chevy and the factory 22s which I want to keep...looks like you stayed with the factory uca? Also what did you end up doing in the rear just blocks? Or did you add a leaf?
  3. Tleesmith14
    Yea I’m talking about the build in the article quoted. Unless I’m messing something? looks like $2400 for the stage 2 $1850 for the front coils $699 for the control arms $1249 the piggyback rear shocks not even including the skid plate or the add a leafs they did...
  4. Tleesmith14
    Great read thanks for posting looks like that setup is over $5k just in parts alone. But gotta pay to do things right sometimes
  5. Tleesmith14
    Looks great man do you have any fender measurements?
  6. Tleesmith14
  7. Tleesmith14
    The dash switch part # I used was 23180146. I don't know if you need this or not. I couldn't get mine to work until I installed then they worked no problem. The switch part number 23180146 however is a fully loaded switch. It has traction control hill braking cargo/bed lights, pedal mover, parking sensors, and lane keep, and the bars. I don't know if there is an option with ones that only you maybe looking for with an LT vs LTZ which I have. The nut/nutsert are available at autozone I believe 8mm but could be wrong. On the harness I made my own following phils diagrams wasn't the easiest wiring job I have every done but it is doable.
  8. Tleesmith14
    Looks good and this is a kit I am very interested in getting..what size tire did you go with? Did the 1/4 spacer keep all 4 tires in the same track or do the fronts stuck way out like you see with alot of the chevys? You say ride quality nothing out of the ordinary how does it compare to stock? Does your truck sag much when towing?
  9. Tleesmith14
    Thanks! I honestly forgot bc I tapped the wires I had used when I did the remote drop tailgate on mine.
  10. Tleesmith14
    So I finally got some time and got mine to function exactly the way I wanted to..... i have an additional switch in my cab that allows me to turn on just my bed lights with the truck in the on position in any gear there for this will not blind the car behind me as it’s only the bed lights. Of course I have added a set of 4 rock lights to the stock ones so I have way more light in the bed. spent about 20-30 bucks on this. I placed a relay in the rear and placed a road master diode in the rear as well. The diode I got allows for 2 inputs and 1 output. So I just cut the supply wire to the bed lights in two and placed the part going to the lights in the output put the other end in one of the inputs the other input comes from my relay. What this allows is for the bcm to not be back-fed. i got the 12v power and ground from the trailer plug wiring. So in theory you could use this to add a switch in the bed if you really wanted instead of having to run a wire up to the cab.
  11. Tleesmith14
    Now that I have done the orl switch mod I have a extra switch I have already mounted in my cab. I’m thinking about having it control a separate 12v hot wire connected to the factory bed rail light harness under the spare tire. This would allow them to still function as they are stock. But then if I want to flip the switch and say I’m in gear it should light the bed rail lights up. My only fear is back feeding it and some how blowing up the bcm or something. Any thoughts?
  12. Tleesmith14
    Good deal that’s what I was thinking when I selected no hud. Thanks!
  13. Tleesmith14
    Yes I always keep mine in the auto setting. Just it seems that in order for orl to be able to come on the headlamp must be lite whether it’s auto or manual either way on mine allows the orl to come on in all gears Including park
  14. Tleesmith14
    Got notification of mine being shipped Friday, I chose no hud but I was just thinking shit I do have the red warning lights that flash if the truck thinks I need to brake. Is this still gonna work or did I mess up?
  15. Tleesmith14
    Seems that you only have to have the headlights on. Tonight mine works fine in all gears including park. Just the headlights have to be on which I’m totally fine with
  16. Tleesmith14
    Got mine working today thanks to @TinkeringFox and @pgamboa
  17. Tleesmith14
    Damn that’s some crap about not working in park. I can understand the other lights coming on but why not allow it to come on in park? Wonder if you can set the parking brake and trick it?
  18. Tleesmith14
    So ,my 17 is in the shop getting to door repainted where the dealer scratched it. Was going to try and order the connectors for the harness. Does anyone no if the 17 1500s have the JST connectors?
  19. Tleesmith14
    Weird I did the contact us during business hours Monday . Got an email back Tuesday and order the programming and the cluster Tuesday.
  20. Tleesmith14
    @TinkeringFox what kinda mini torch in the Video is that I need to pick one of this up
  21. Tleesmith14
    Awesome find man I just cancelled my order from gm parts and got this one saved $112 bucks only one problem I see once I get this working I’ll be wanting to put a diode in the brights to make my light bar come on every time I hit the brights lol
  22. Tleesmith14
    Are yall just calling Specmo on the 800.545.7910 number? are you asking for a specific person to get the price match and drop shipping to White ? Going to get with white to do this soon on my 17 so just gonna give them to part number of page 29 after of course confirming with chris. Just didn't know if there was a specific person at Specmo to talk with Thaks
  23. Tleesmith14
    This is awesome probably order one this week. So when’s the @pgamboa harness available? How much lol?
  24. Tleesmith14
    That will do the trick I’ll find it from there in the manual thank you @pgamboa
  25. Tleesmith14
    Does any one know the numbers of the 3 plugs on the bus bar? I'm thinking one is the K38 but I was trying to located them on the Service manual to see what all the wires are in each of these plugs for a couple ideas I'm looking at.
×
×
  • Create New...