Jump to content

c1823a

Member
 View Profile  See their activity

  • Posts

    22

  • Joined

  • Last visited

 Content Type 

Everything posted by c1823a

  1. c1823a
    Ezekiel, is this still working for you? I just took my 2021 High Country to the dealer today because i keep getting the "SD Card Error - SD Card Has Been Removed" and my Navigation no longer works.
  2. c1823a
    No photos to share, mine is still stock but, for those who have installed taller than stock tires - up to 35" - how has it affected overall drivability, shifting at highway speed, etc.? I had 35's on an older model Silverado and at 65-75mph on the interstate, it had issues staying in top gear. Just curious to hear real-world experiences. TIA
  3. c1823a
    I own a 2021 4x4 High Country - the seats are hard. They "may" be slightly more comfortable than other trim levels, not sure, but I can confirm they are not very comfortable for trips more than about 1 hour. I often ride in a 2021 Ford Lariat and the seats are MUCH more comfortable - i don't want a Ford, just expressing my opinion on the seats.
  4. c1823a
    Sorry if I'm asking a question that's already been asked and answered many times but, anyone have a list of torque specs or point me in a direction to find them? In particular; Upper Strut Mount Nuts - Lower Strut Mount Bolts - Upper Ball Joint Nut - Sway Bar End Link - Thanks!
  5. c1823a
    Bump ^ for this question ^
  6. c1823a
    So the increased angle on the lower control arm, caused by the upper strut spacer, didn't put the ends of the lower strut bolts closer to the CV boot? Or, not close enough to matter maybe? Just trying to get as much information as possible on this before I buy and install. Was curious if you or anyone else may have turned the lower strut mount bolts over so the threaded end isn't pointing at the axle/CV boot. Granted, it may require new/different bolts if that's the case.
  7. c1823a
    Another question, after you installed the Upper Strut spacer, how close did it put the Lower Strut mounting bolts to the CV boot? Since the lower strut bolts are installed from the bottom and the end sticks up towards the CV axle/boot.
  8. c1823a
    Ah, sorry.....I didn't see that yours is 2WD until I read it again..... Yeah, you shouldn't have any problems.
  9. c1823a
    There's been a lot of communication (and photos) on here about the CV boots contacting the bolts/mount on the bottom mount leveling kits when at full drop. How does yours look? Are the boots really close to the bolt heads when the wheel is at full drop? Just curious.
  10. c1823a
    Which 1.5" top spacer did you use?
  11. c1823a
    Are these the Rough Country's you're referring to?
  12. c1823a
    Ah, Ok. Thanks for the update. Was planning to install this weekend but, glad I got in touch with you first.
  13. c1823a
    Xsquid, any install advice for the MotoFab 1.5" Lower spacer on a 2020 RST 4WD? I installed 1.5" lower spacers on a 2010, 2 wheel drive many years ago and did not do all the steps MotoFab shows for the same type kit but for my 2020 RST.
  14. c1823a

    2008 GMC All Terrain

    c1823a commented on BHunter's gallery image in General/Off Topic

    2008 GMC All Terrain
    I like it!
×
×
  • Create New...