Jump to content

J.H.2015LT

Member
 View Profile  See their activity

  • Posts

    78

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by J.H.2015LT

  1. J.H.2015LT
    I installed the Rancho Quick lift loaded struts and matching adjustable shocks in the rear. Levels the truck out nicely and gives options for how stiff the shocks ride.
  2. J.H.2015LT
    I personally went to Headlight Revolution for my LED bulbs. I did everything except the turn signals so far. https://www.headlightrevolution.com/buyer-guide-by-vehicle/2016+Chevrolet+Silverado_1500_with_Halogen_Headlights
  3. J.H.2015LT
    I have the ATAK setup on my truck. I love the way it sounds, my neighbors..not so much. https://youtu.be/mECkXdBaJtc
  4. J.H.2015LT
    I installed the GTR Carbide 2.0 bulbs as well. You will need one resistor for each bulb. These are the resistors I used: https://www.headlightrevolution.com/closeout-resistors-capacitors?quantity=1
  5. J.H.2015LT
    That is the look I am going for. Good looking truck!
  6. J.H.2015LT
    If you find anything that looks good with our trucks please share. I'm looking to change my wheels out as well.
  7. J.H.2015LT
    I have the same truck just the double cab version. I have been looking at gun metal with black for wheels. Something like this, https://www.americantrucks.com/vision-14silverado1500-111-nemesis-gunmetal-wheel-17x9-12mm-offset-111-7983gm-12.html
  8. J.H.2015LT
    When ever my family and I go out camping I increase tire pressure from 35 psi to 40 psi to help with pulling our camper. I try to distribute the weight as evenly as possible, put the heavy items closer to the cab and over the rear axle. Small things like that make a difference in control and ride quality.
  9. J.H.2015LT
    Yes, I took the nut and washer off the bolt that is closer to the wheel well and slid the bracket on. I did not have to remove the hitch receiver, it slid right on then torqued it back down.
  10. J.H.2015LT
    Not at all, they have a hanger that is provided in the kit that bolts up using the hitch receiver hardware. Just make sure you torque it back down to the hitch receiver specs. I would post a picture but unfortunately my truck is in the body shop. During the most recent snow storm a plow took out the passenger side bed side and rear bumper.
  11. J.H.2015LT
    I agree, I still have my factory 17" wheels. My next add is a levelling kit with 33's. I prefer more sidewall than wheel.
  12. J.H.2015LT
    I went with the AFE momentum GT as well. This intake along with my Borla ATAK exhaust woke my truck up.
  13. J.H.2015LT
    Those look nice! Is there a substantial improvement in visibility when driving at night?
  14. J.H.2015LT
    Do you have any pictures of them?
  15. J.H.2015LT
    head light revolution does a pretty decent job going over different options. I personally went with the SV-4 bulbs and have not had any issues with them.
  16. J.H.2015LT
    Those illuminated bow ties look great on painted grills. I want to try it on my chrome grill but not sure how well it will turn out.
  17. J.H.2015LT
    I am considering putting those on my truck as well. What resistors fail? I thought they were encased in one unit with out the need for external resistors.
  18. J.H.2015LT
    What tail lights do you have on your truck? Are they the Morimoto XB LED tail lights?
  19. J.H.2015LT
    Nice stance! Where did you get the grill with the LED illuminated bowtie?
  20. J.H.2015LT
    https://www.amazon.com/gp/product/B07D7LJX4L/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1 This is what I used. I have the putco blade tailgate light. This connector plugs in between the truck factory wiring and the 7 pin connector on the bumper of the truck. The four pin pig tail is where I connected my light bar. This way I don't tie up the 7 pin or the 4 pin connector on the bumper.
  21. J.H.2015LT
    Nothing too crazy, just installed boost auto dual function (cargo and reverse) wiring harness. This way the LED lights on my tow mirrors will turn on when the truck unlocks at night and automatically when I put it in reverse. This still gives me the ability to turn them on with my cargo lights as well. Nothing major just a nice feature.
  22. J.H.2015LT
    Any rubbing issues? I am considering the moto fab 3 inch front spacer and 2 inch rear block. I want to put 33's on my truck as well.
  23. J.H.2015LT
    Washed and ceramic coated today. Truck looks great after a bath! Sent from my SM-G965U using Tapatalk
  24. J.H.2015LT
    Borla ATAK cat back system
  25. J.H.2015LT
    I agree. I love the Borla exhaust I put on, but at first my neighbors hated it. They have since gotten use to it and don't mind it now.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,894
    Total Members
    8,960
    Most Online
    TopBo
    Newest Member
    TopBo
    Joined

  • Who's Online   4 Members, 0 Anonymous, 3,052 Guests (See full list)

×
×
  • Create New...