Jump to content

81mmcat

Member
 View Profile  See their activity

  • Posts

    48

  • Joined

  • Last visited

 Content Type 

Everything posted by 81mmcat

  1. 81mmcat
    Can anyone explain why the oil pressure runs higher after the DFM is shut off? just installed the Pulsar Lt.
  2. 81mmcat
    Does look good thanks for the pic!
  3. 81mmcat
    If possible post a pic of the cover on your console Thanks........
  4. 81mmcat
    Elevation?
  5. 81mmcat
    only feed back i have is on a 2019 gmc sierra ( should be the same) 5.3/ 8-speed, the exhaust had to be moved to drop pan.
  6. 81mmcat
    try this https://motofablifts.com/i-30558220-07-23-chevy-gmc-silverado-sierra-1500-1-2-front-leveling-lift-kit-tm.html?ref=category:1390565
  7. 81mmcat
    try this, https://www.shopchevyparts.com/silverado-1500/wheels-c-26_6392_6527_6539.html
  8. 81mmcat
    Running cooper at3 285/60/20 on my stock gmc stock wheels 1500 at4 . O rubbing, I think chevy has a bigger wheel well? Also when going through those radar detector signs was showing the same speed as the truck was up to 40mph. Have not checked at higher speeds.
  9. 81mmcat
    Am looking at these and was wondering what the diff. is between the standard sport steps and the "off road edition sport steps" they look the same?
  10. 81mmcat
    updated
  11. 81mmcat
    T What about contacting MVI and see if they can do anything for you?
  12. 81mmcat
    Has any one installed a Pulsar LT on a 2021 1500 that didn't come with the auto stop start? And how did it turn out?
  13. 81mmcat
    Thanks for the info
  14. 81mmcat
    Any difference in ride quality with the new type rancho shocks compared to the ones that came from the factory?
  15. 81mmcat
    looks like it and we all hope so!
  16. 81mmcat
    Lt= light truck
  17. 81mmcat
    No expert but that sounds like a good choice. Good luck and enjoy it
  18. 81mmcat
    Or buy the factory 2" lift and have a competent mechanic install it. Look at the gm kit no control arms included, should speak for itself
  19. 81mmcat
    the problem is when you go higher than 2". Had 2" on my 2014 60,000 miles still drove like new when I traded it in. I really suggest you go to the silv/gmc mods section and read a crap load of info there. Most guys with trouble are raising their trail boss or AT4 higher without the UCA's
  20. 81mmcat
    yes all stock if you search some on this sight you will see that all the 19-21's have the same upper control arms you don't need aftermarket ones unless you go more than 2" on factory slt 1500
  21. 81mmcat
    I have a stock 21 1500 AT4 and put on 285/60/20 cooper at3 xlt, 0 rubbing using factory wheels, no wheel spacer
  22. 81mmcat
    I was thinking about the same but nice to hear that others had the same opinion thanks
  23. 81mmcat
    Not sure myself but they had to come off to install a front hitch. Surely does not look like it does much to me. Also don't think it is for transport since they come in the factory 2' lift kit from GM.
  24. 81mmcat
    What are the front compatibility brackets for on the trial boss and At4 for. Also called chassis frame reinforcement (84421434) do not look like they do anything?
  25. 81mmcat
    motofab
×
×
  • Create New...