Jump to content

Nasty

Member
 View Profile  See their activity

  • Posts

    3,315

  • Joined

  • Last visited

  • Days Won

    13

 Content Type 

Everything posted by Nasty

  1. Nasty
  2. Nasty
    You might need to. And if you want to live dangerously. I have a notch for sale strongest notch for these trucks
  3. Nasty
    Put those bump stops in for sure and keep an eye on your driveshaft. You may need to have it shortened like I had to do with mine
  4. Nasty
    Level and tire specs please
  5. Nasty
  6. Nasty
    Mcg helpers are 350. And bolt in. No drilling.
  7. Nasty
    I had the stock reciever on. I pulled it off. Because I dont use it to do anything other than drive it now
  8. Nasty
    Yes and no. I had to get an ltz light harness. And pgamboas resistor harness. You need parts but it's all plug and play way betterthan the LT lights
  9. Nasty
    I towed wifes chevelle with my RC 4/7 drop but I had helper bags
  10. Nasty
    The whole light is different compared to an LT light. Plus they are LED
  11. Nasty
    Ni?
  12. Nasty
    Are you sure it's not the driveshaft? I had a clunk to and it ended up being the driveshaft. I had to grease it
  13. Nasty
    I've had issues with every djm part I've ever had. Especially the control arms. I just removed 2sets kn the last few months from local peoples trucks. They dont ride well, and the balljounts are crap
  14. Nasty
    Do your self a favor and just do a 6 in the back. Return the control arms for struts and spindles
  15. Nasty
    What do you mean trimmed the pad?
  16. Nasty
    That will bring my rear up 1/2" screw it. I'm going up to 6. Barely a difference thank you
  17. Nasty
    1 more measurement while you're at it center of hub to the fender. In the rear please. I think I'm lifting mine to 6
  18. Nasty
    Are you doing to notch it? I'm at 4/7 in my rc and I almost need a notch. Cc sit lower than rc
  19. Nasty
    That's at 5. I'd you can do the same at 6 that would be perfect. Becsuse I might lift mine from 7to 6 in the rear
  20. Nasty
    Are you at a 4/6? I havent seen your truck
  21. Nasty
    Yes and is it a rc or cc?
  22. Nasty
    Can you get me a quick picture. I need to see the distance between your frame and axle pad in the rear. If you can hold a tape .measure in there that would be even better
  23. Nasty
    I'm looking at the maxtrac 3" level as of now. I just want to level the truck for the summer and then drop it back down when I get bored. If I need to I'll order the reklez upper arms if the balljoint angle is to much Anyone see an issue with this?
  24. Nasty
    Level and tire specs please
  25. Nasty
    Mcg
×
×
  • Create New...