Jump to content

Nasty

Member
 View Profile  See their activity

  • Posts

    3,315

  • Joined

  • Last visited

  • Days Won

    13

 Content Type 

Everything posted by Nasty

  1. Nasty
    That was a choice me and atomic came up with. Viking said the front end of a regular cab v8 needs 630lbs to feel stock. The spring is chosen for what you want to do. 500 for drag racing up 10 950 or 1000 for say if you were to road race. I wanted a. It stiffer than stock but not to stiff because the coilover is double adjustable to I could stiffen it up a little. So 750 ish was a nice median
  2. Nasty
    I haven't had time to install them yet. But yes the whole setup is from atomic very nice guy to work with. He even made me rear shock relocation to the specs I wanted
  3. Nasty
    It's from emblem pros. They make it to what size you want mine says LTx
  4. Nasty
    You.drill a hole in the stock mount. So the extended doesn't pivot that's what the small bolt if for
  5. Nasty
    That would be the worst thing you can do. Using a strut and 2" arm. That will make your front wheel closer to the rear of the front wheel well. Which looks ugly and more rubbing. If you want 2 more inches you do spindles
  6. Nasty
    Your problem was running struts at the lowest point. And djm is absolute garbage. You'll find out after having it on for awhile. But yes if you want lower. Get spindles
  7. Nasty
    Do the flip kit
  8. Nasty
    Post a link to the kit , 4" springs doesn't sound right
  9. Nasty
    I've seen that kit. Looks good and a great price. Luckily I have a regular cab. I don't have to worry about that
  10. Nasty
    K2 shafts suck ass anyway so at that point you just have better ones made
  11. Nasty
    Probably has the single peice shaft and not 2 peice
  12. Nasty
    It will rub everywhere anything lower than like a 2/5 I bet will rub. That's bigger than an oem size tire
  13. Nasty
    What's the rubber used? Thickness and type
  14. Nasty
    Got the ltz front bumper filler/skidplate Sent from my SAMSUNG-SM-G920A using Tapatalk
  15. Nasty
    Took it to work last weekend Sent from my SAMSUNG-SM-G920A using Tapatalk
  16. Nasty
    Fender well most likely Sent from my SAMSUNG-SM-G920A using Tapatalk
  17. Nasty
    Pull the bumper. Use a stock wheel. 35s will still rub but minimal Sent from my SAMSUNG-SM-G920A using Tapatalk
  18. Nasty
    So you don't want prerunner you just want to fit 35s?
  19. Nasty
    Baja kits prerunner kit. Tbere is a member here thay has the kit
  20. Nasty
    Lowering shackle Sent from my SAMSUNG-SM-G920A using Tapatalk
  21. Nasty
    Switch to the next hole on th4 shackle Sent from my SAMSUNG-SM-G920A using Tapatalk
  22. Nasty
    Do you have the lift hanger (shackle flip) installed ? Sent from my SAMSUNG-SM-G920A using Tapatalk
  23. Nasty
    Should be fine. Sent from my SAMSUNG-SM-G920A using Tapatalk
  24. Nasty
    You will run a little bit in front especially at full lockout shouldn't be bad if you juat do a 2/5. Only problem with that is you will want lower. But 2/5 should look pretty good
  25. Nasty
    Delete post
×
×
  • Create New...