99sitr

Quite a bit originally due to the extra width and height on the tire over a normal 35X12.50 Nitto. Front at about 30% turn was hitting the metal corner on the front bumper and at full lock it was rubbing the rear firewall inner fender (black plastic insert). I solved the front and gained plenty of room by spacing the front bumper out (1/2") a hair and raising it up 1/4" as well. Now I just need to address the slight rub at full lock on rear. The Zone knuckles might not stick out as far as the RC knuckles which would eliminate the issue. That wheel offset you have is 5mm less than mine which will help as well. I have a good 4" to the swaybar at full lock so I could have stuffed them inside the wheel well more if I had the option on the wheels. The company I work for is a RC vendor as well as for several wheel manufacturers so I was being cheap and only went with what I got dealer cost on.

Chiming in with mine. 2016 Silverado Crew Cab Z71 LTZ RC6" lift XD825 Buck 20X10 -24 offset Nitto Terra Grappler G2's (325/60/20)