chris84

iDash mount from Block8head. No broken tabs, great condition. $150 shipped *iDash not included

Anyone? These have the cameras, power fold, task lights, heat

bump

Set of Tech Pkg mirrors & door harnesses from a 2020 AT4. I believe the mirrors only fit GMC. $775 shipped in the lower 48 for the package.

This^ Thanks

Did you get VPM reprogrammed & reinstalled?

I believe there is a sensor, but there is a programming issue between it & the "gauge" display. I can watch the DEF level drop on my I-Dash as you would expect when putting on miles. The gauge on the truck display had been going down & then went back up to 1/2 while my I-Dash read 0.

$95 shipped SOLD

Well you've been one of the guinea pigs on swapping mirrors might as well continue, ?, let me know what happens when you drive with it removed. Did you wire the rear facing task lights on yours? Wondering if I should be able to just run the wire to the door frame harness, as I swapped the in door harness when I did the mirrors.

So WAMS can reprogram/calibrate the video module https://www.whiteautoandmedia.com/product/t1-pickup-vpm-programming/ 1. It's located behind the rear seat? 2. What problems/codes will it cause using the truck while it's removed to get reprogrammed?

Awesome, guess I should have checked there first.

Have you looked at what it would take to get the cameras working correctly if swapping to tow mirrors? Thanks

Did you swap your harnesses?

Did a 2500mi road trip this past week. Out to Colorado & then back to Wisconsin. Was averaging 22-26 mpg. -Nebraska seems to have crappy fuel, had lower mileage both ways after filling up there. Had just had my oil changed the week before & the dealer filled the DEF for me - used about 40% of it over this trip, was still at 25% before the oil change with around 4850mi. My adaptive cruise disabled itself at one point - right after the sun came up heading into it. Not sure if that caused it, after stopping to fill up about an hour later it was working again. There seems to be a mileage point at which it will do a regen, whether the DPF is at 100% or not. Driving I-70 over the continental divide actually had the soot load going down without a regen. After about 4 hours of driving seems to also have the DPF soot load hold pretty steady or decrease.

That's what I thought but was not positive.

I believe these may be your only option without customizing some intended for the Silverado

Yes, didn't have time to post before heading out west after I got them on. As expected the mirrors adjust, fold, heat all work. For the lights - the orange marker lights & blinkers work, forward facing task lights work, the rear facing task lights do not work - I haven't had time to read what which button should turn them on though. Cameras are skewed as others have reported. I don't know if it was doing this with the regular mirrors or not, but the passenger blind spot indicator often does not illuminate when passing semi's, seems to work on cars & pickups though. It did seem to work if I slowly passed a semi. When you install the harness make sure you get the wiring around/behind the window track at the back (near the handle) of the door.

Any tips, tricks or anything to watch out for when pulling off the door panels?

I just picked up my harness for under the dash from the dealer today, but it looked like there was four stubbed wires coming off that.

I'm planning to swap mine this weekend to the tow mirrors & harnesses .

Do you have the Tech pkg/360 view cameras?

SDHQ makes A-pillar mounts

Search Block8head Custom vent pod on Facebook. Hopefully he is getting them finished faster - told me 3+ weeks when I ordered, took nearly 9.

Also put in a diode to turn on the fogs with high beams

Got rid of my temporary "mount" & installed my vent pod