mike67naz

Just traded my 2016 Sierra SLT in for 2024 Denali

Here is passenger side

Just placed my order for a GMC set, $95 plus shipping - will install this weekend

Does anyone know if this will work on previous gen trucks? i.e. 2016

No idea on thread pitch

18mm hex head bolt. You should get 2 per hook if bought new.

Plan on removing driver side tomorrow....did they slide straight in or angle or something? I can start the long side, but short side stops for some reason....

Guys, could use some help.....Is there a trick to installing the hooks after you remove? Took out passenger side, and tried putting in new chrome ones. Could not get it to go in...Still have the plastic piece between frame end and bumper there. Shoud it just slide in or is it a super tight fit? Thanks

Contact Chris @ White Auto & Media for programming costs (each one is unique). My application, total cost (cluster & programming) including all shipping came in @ $700ish. I purchased a new cluster instead of trying to find a used one. Just shy of 3 weeks from ordering cluster to installing in truck.

Well, huge thanks to Chris White @ White Auto and Media, rcvd & installed my Denali cluster after work today. Super easy - 2 tools: 15 Torx & 7mm socket. 2016 Denali cluster GM part #84254168 for 2016 GMC/Chevy, approx $400 new + programming cost. Best money spent on coolest mod to our trucks. Stock Sierra SLT Denali cluster 20 minutes tops for install

With the stock intake you would have 1 open outlet on the airbox. You have 2, one for each cylinder bank. The hose on the top of the can goes onto one of those. That is why I went with the GM CAI instead of say, Cold Air Inductions - they also have 2 outlets on the tube. GM has one, so it works out for my case.

Here is my UPR Catch Can w/o CSS on my 2016 5.3L Sierra with GM Cold Air Intake.

2014-2015 correct. Changed on 2016 and up. I know, just checked this weekend, my 2016 Sierra does not have the same exposed bolts to undue.