NitroDatsik

all the leds work lol, but you know those 2 plastic parts that divide it well that's what makes it look like that. I didn't realize that on the left side the strip is a little more to the right so you see the led that's supposed to be behind the plastic part. Yes I did thought about putting a bigger led strip but I already had this laying around. Sent from my SM-N900T using Tapatalk

just got done installing a billet Mesh grill insert, while I was at it I installed led strips between the grill gap. Sent from my SM-N900T using Tapatalk

My trucks dash volt meter sometimes is around 14 and sometimes around 12.is weird, also sometimes the oil meter neddle goes up and down. Wicked Galaxy Note 3

Just this one for now, I couldn't remove the ac trim so I have to do it in place and I don't have time. Wicked Galaxy Note 3

plasti dip white to match my truck, looks real clean. I'm going to the the trim around the ac vents, doors. Wicked Galaxy Note 3

I found some antennas on Amazon but I'm not sure if they will fit good, where did you get yours? Wicked Galaxy Note 3

I have a 2014 silverado crew cab 2WT and I haven't opened that part but I do hear sound coming out of there. Wicked Galaxy Note 3

I left the letters on the truck just left a 1/2" space between the letters and tape. Then just peel the dip off and it cuts off right where every letter starts. Make sure you let it dry enough after your last coat or you might peel part of a letter. Wicked Galaxy Note 3

Just got doing the install of the ddm hid kit 35watt 6k with dual input/output relay and 2 error cancellers. It gave me a hard time as the lights would not come on and I had everything hooked up as the correct diagram on op. Now they seem to be working good I hope this will last longer then the time it took for the kit to arrive. Wicked Galaxy Note 3

I will as soon as I get to it. Wicked Galaxy Note 3

We just purchased a white work van and I'm about to plasti dip the windows white from the inside so no one can see the tools inside. Wicked Galaxy Note 3

Looks good to me and it doesn't peel, been through the car wash twice and still in perfect condition. Wicked Galaxy Note 3

to much, plasti dip would have cost you $7 Wicked Galaxy Note 3

details. Type of bar and which exact wires did you tap. Also you need to change the tail light reverse yellow bulb so they can match. Wicked Galaxy Note 3

I got the 2014 silverado 2WT and after ttl I'm paying a few dollars short of $43k Wicked Galaxy Note 3

I took my amazon Kensun kit off because of not working issues so now I'm giving it another shot with the ddm kit, now I play the waiting game. Wicked Galaxy Note 3

20x10 - 24 offset with 305/55/20 Wicked Galaxy Note 3

Has anyone tapped into the cargo light switch to turn the bed lights on? Wicked Galaxy Note 3

I have the same setup but my tires are Falken wild peak and it rubbed about 1/8" so I just cut a little bit of the fender mat n wacked the back side of the sheet metal n no issues nowfingers width of clearance now. Wicked Galaxy Note 3

before (the day I got it) to after with a 3" level kit (1 5/8" metal top strut spacer) 20x10 fuel hostage - 24 offset 305/55/20 Falken wild peak a/t It did rub a little, I just cut a small piece of the back mat and hammered the sheet metal about 1/8". Wicked Galaxy Note 3

I gave him a link to the same ones I bought, they fit just right. They come with a nut to tighten it once it goes through the plastic. I suggest use a rubber washer and it gets a little tricky to tighten it but it can be done. plasti dipping my remote white to match my truck. Did the same to the steering wheel Chevy sign and I'm thinking of doing some of the removable panels on doors and dash. Wicked Galaxy Note 3

Interior Lighting Fusehttp://www.gm-trucks.com/forums/index.php?/topic/158559-Interior-Lighting-Fuse Interior Lighting Fuse Follow that ^^^¡ thread for the step and interior lights. You'll need some extra wire to run the step and footwell lights. The ones on the rear bumper are long enough, tap those into the led red wire into green wire of each one of the reverse tail light and a self tapping screw for ground. Interior + rear bumper light Jorge Rangel wants you to see this item at Amazon.com Universal 6pcs High Power White 3w LED Eagle Eye Bumper DRL Fog Lig... http://www.amazon.com/dp/B00FEZEVQK/ref=cm_sw_r_udp_awd_9Gnetb162K2WQ Step light Jorge Rangel wants you to see this item at Amazon.com 4 Pcs 30cm Car Truck Flexible Waterproof LED Light Strip White (White) by Generic http://www.amazon.com/dp/B00EXGRRJE/ref=cm_sw_r_udp_awd_sInetb15EE7MC Reverse tail light led Jorge Rangel wants you to see this item at Amazon.com iJDMTOY Extremely Bright 7.5W High Power 912 921 LED Reverse Light Bulbs, Xenon White by iJDMTOY http://www.amazon.com/dp/B008G4Y076/ref=cm_sw_r_udp_awd_zJnetb03XASG6 Wicked Galaxy Note 3

2014 silverado crew cab WT 1 5/8" spacer on top of strut Fuel hostage 20x10 with Falken Wild peak 305/55/20 Cheap 3" step from eBay and bed rug 55watt Kensun hid 5000k kit Interior footwell lights Step lights Led reverse, cargo, and licence plate lights Rear bumper step led light Maxfloormats Dee Zee tailgate down assit Plasti dip name and badges $50 seat covers. Wicked Galaxy Note 3

14 silverado. I unplugged mine for about an hour. Still my green dash light doesn't turn on and my headlights are on during the day all the time now Idk if the hids I installed triggered something. When I manually turn the knob for only drl they turn on and the dash green light comes on. Also when it gets dark the green light comes on and I'm not sure if the drl are on also since I can't see them with the hids shining. Wicked Galaxy Note 3

so the spacer you installed was 2.5" thick? So then I shouldn't have problems since mine was only 1.5" thick but magically made the 3" difference. Sent from my SM-N900T using Tapatalk