Jump to content

Buckwild27

Member
 View Profile  See their activity

  • Posts

    499

  • Joined

  • Last visited

  • Days Won

    20

 Content Type 

Everything posted by Buckwild27

  1. Buckwild27
    I have the PPE pan on both my trucks. No regrets here.
  2. Buckwild27
    With factory cooler and the bypass, driving through stop and go traffic in Pittsburgh in the summer my truck hit 175° in the winter time you might see 120°. I put the updated thermal bypass valve back in for the winter in my work truck. I do a lot of open road driving and it doesn't get over 100° in a 70 mile drive with the bypass. It's around 140° with thermostat in. These are pan fluid temps.
  3. Buckwild27
    Aftermarket cameras have different plug then the factory gm cameras. The gm mirror camera has one plug that does everything.
  4. Buckwild27
    Aside from buying new. No i have not.
  5. Buckwild27
    I personally haven't done this because all my trucks had fog lights. But I would assume it's just missing some wiring on the front harness. I believe Gen5 has adapter harnesses to add fogs.
  6. Buckwild27
    Got a set of 2024 police tahoe wheels for my 2014 sierra, for winter. Just finished putting on the center cap decals.
  7. Buckwild27
    $2.87 for 87 oct.
  8. Buckwild27
    I put gas in every 3 days today's price is $3.29
  9. Buckwild27
    I'm really not. Sometimes the truth hurts.
  10. Buckwild27
    Well the folks around these parts have a lot of trains and not a lot of brains, And they post the prices on gas buddy after their discounts. Instead of posting what the pump says before they touch it.
  11. Buckwild27
    I find that the people that do that are posting the price they pay after their discounts from the actual gas station rewards program. They do it here all the time. It is most annoying.
  12. Buckwild27
    The switches are all the same function wise. That's just an updated part number. Are you sure the autosync can make the offroad light switch work in the bcm? I know it allows you to change the turn off delay for trucks that have the factory programming. I have an autosync and I had to build the latching relay setup to run the switch in my 2014.
  13. Buckwild27
    3.08 is the other one.
  14. Buckwild27
    Here's the rear caliper adapters needed for the swap.
  15. Buckwild27
    Also i you're going to need a new spare tire wheel. I went with the 2023 police tahoe 20x9 Steel Wheel.
  16. Buckwild27
    For the most part stock wheels I think anything 20" and up clear depending on year of truck.
  17. Buckwild27
    Thank you, just FYI I didn't actually have to shave down the calipers to fit on the front. My wheels cleared. I was just trying to make Banshee look like a bougie b!#$%.
  18. Buckwild27
    Yes, I do.
  19. Buckwild27
    The 4mm spacer? My dad made mine. But most people just use 2 flat washers stacked together
  20. Buckwild27
    The front calipers will need a 4mm spacer between calipers and the spindle mounts to center it over the rotors. If you do the rear you can get brake calipers from a gen 6 SS camaro those will require brackets to bolt up. I've done front and rear on my 2014 sierra and have about 10,000 miles on the new brake setup.
  21. Buckwild27
    Nice. I hear you with the one project at a time. They tend to get away from ya some times.
  22. Buckwild27
    Well that is some crap. Maybe you can cannibalize the truck seats and put it in the camaro seats.
  23. Buckwild27
    Ok, let me know what you find out when you get home.
  24. Buckwild27
    Oh. I misread the post I thought you had heated seat function in the truck. I put 2020 yukon denali seats in my 2014 sierra. But I had heated seat capabilities already. Do the camaro seat have adjustable lumbar support and manual reclining?
  25. Buckwild27
    You can just unplug the sensor on the brake booster hose to prevent it from going into v4 mode (this sensor is what tells the ECM it has enough vacuum to allow V4 mode) and you will be able to use all 8 gears.
×
×
  • Create New...