Jump to content

Nasty

Member
 View Profile  See their activity

  • Posts

    3,315

  • Joined

  • Last visited

  • Days Won

    13

 Content Type 

Everything posted by Nasty

  1. Nasty
    Those are the ones you want for a 4 door But id look into some vikings with shock extenders. Only thing is you have to do a little grinding on thr extender to clear the shock body
  2. Nasty
    Ok thats why. I have mcg. They go 3" Sent from my SM-G955U using Tapatalk
  3. Nasty
    You have the belltech struts? Sent from my SM-G955U using Tapatalk
  4. Nasty
    Take a ring out of the drivers side
  5. Nasty
    Thats very strange. Usually tbese trucks lean half inch to the drivers side. It will lower the oppsite side rear a little. Teeter totter effect
  6. Nasty
    What is active grill shutters?
  7. Nasty
    I got this nut from belltech as well. I didnt quite need it but it was close enough to buy it https://www.summitracing.com/parts/bel-2508-777
  8. Nasty
    I always use a through bolt. Every coil gets its own bolt. Wire each side. Coming from spl made it easy to change final amp load just swapping the wire on the outside of the enclosure Sent from my SM-G955U using Tapatalk
  9. Nasty
    You could always swap the front end to cast. Ive done that to trucks here in town but might be more than you want to do. Or just run a 20/17 like i did for awhile
  10. Nasty
    I think you have stamped steel. Could be why. I think you have to have a certain offset wheel. But i could be wrong
  11. Nasty
    I have the cast arms. Maybe thats it i do know a guy with a 17 crew cab. Stamped steel arms and he has to use a spacer in the front with a 7 wide wheel and his clears Sent from my SM-G955U using Tapatalk
  12. Nasty
    I have 17s with mcg spindles
  13. Nasty
    Thats one thing i could never do is get the seams to look right
  14. Nasty
    He ised belltech amd he has 4wd though. O think that was the issue but dont quote me on that
  15. Nasty
    Glad you think so because this is current Sent from my SM-G955U using Tapatalk
  16. Nasty
    Thats an old picture. This is more recent with bigger wheels and ltz front valance Sent from my SM-G955U using Tapatalk
  17. Nasty
    Damn thats clean
  18. Nasty
    Of youre only going 4 you should be just fine Sent from my SM-G955U using Tapatalk
  19. Nasty
    I know guys using belltech spindles have had camber issues at 4 and over. I know a few guys including me using mcg spindles over 4 amd have no issues Sent from my SM-G955U using Tapatalk
  20. Nasty
    Nope Sent from my SM-G955U using Tapatalk
  21. Nasty
    No inez. Please dont. I couldnt tell you how many sets i pulled off of local trucks last year. I have mcg spindles and struts set at 4.5" of drop. My camber is well within gm spec amd has been for almost 2.5years now
  22. Nasty
    Never ever ever use djm or inez (especially inez). Always go spindles and struts or spindles and coilovers
  23. Nasty
    Damn i like that
  24. Nasty
    The rear fender lip on these trucks sits lower than the front
  25. Nasty
    Get the whole kit. Belltech or mcg

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,764
    Total Members
    8,960
    Most Online
    Tbhats2130
    Newest Member
    Tbhats2130
    Joined

  • Who's Online   1 Member, 0 Anonymous, 2,126 Guests (See full list)

×
×
  • Create New...