Jump to content

nobaddays

Member
 View Profile  See their activity

  • Posts

    114

  • Joined

  • Last visited

 Content Type 

Everything posted by nobaddays

  1. nobaddays
    Mine just did this, but now it also will not start... Currently on my 2nd head unit after audio would randomly turn off, brought into dealer 3 times for same issue. Overall I have been happy with the truck, but these little issues are starting to p*ss me off.
  2. nobaddays
    I used color matched paint that came in a rattle can, and 4k clear. You have to go in from behind the badge to get it off the fender. After that you need to drill out the plastic tabs on the back to take it apart. I used a razor blade to lift up the old badge and remove. Its only on with two sided tape.
  3. nobaddays
    I bought color match rattle can paint and 4k clear coat.
  4. nobaddays
    It won't beat the factory fitment, plus if you have a front camera you will have to cut out a space for it in the overlay. I would say it looks nice from 3 feet, but you can see a small amount of black chrome under it if you look too close. It is 3M adhesive that holds it on, so it should be removeable.
  5. nobaddays
    I painted my factory ones and added a custom insert. You can get replacements here: https://www.gmpartsoutlet.net/v-2020-gmc-sierra-1500--at4--6-2l-v8-gas/body--exterior-trim-fender The first 6 part numbers are the different options.
  6. nobaddays
    Yes, its an overlay. I got it from here: https://gr1performance.com/product/2019-2020-gmc-sierra-1500-only-fits-at4-and-slt-2pc-black-overlay-grille/ Ebay may have them cheaper.
  7. nobaddays
    I had to bring it into the dealer and they had to clear the system, reset it and disable the air filter monitor. I couldnt do it myself.
  8. nobaddays
    PM sent.
  9. nobaddays
    My headlight knob was slightly smaller as well, I had to put some scotch tape on it to make the new knob stay on.
  10. nobaddays
    It definitely is a better ride than the Ranchos. I haven't noticed any severe bouncing with the 5100's.
  11. nobaddays
    Just make sure you order the correct 5100's. There is a part number specific to the AT4 which is a longer shock. I replaced the Rancho's with 5100's in mine. I took out the factory 2" block in the back and put in a 1". I had the front shocks set at +1.1" and now the truck sits nice and level. No axle replacement required.
  12. nobaddays
    Just got my tracking information this morning! I ordered the carbon black as well, so you should be getting yours at the same time I would think. Also just so you know, the carbon black isn't a matte finish, it will be the same color as my truck in my profile pic. "Carbon Black Metallic"
  13. nobaddays
    How long did it take you to get yours? I ordered mine on the 22nd of Dec. and still haven't gotten them...
  14. nobaddays
    Finally!
  15. nobaddays
    I used a razor blade to get under it enough to lift it, then grabbed it with a needle-nose and pulled it the rest of the way off. If you do it very carefully, you can do it without scratching anything.
  16. nobaddays
    Don't waste your money on the factory Rancho's. I swapped mine out for 5100's after 4k miles.
  17. nobaddays
    I broke several tabs taking mine off as well... Tried wrapping them and failed. Ended up buying a used set and painting them to match my truck.
  18. nobaddays
    Thanks for the info and pics!
  19. nobaddays
    Nice! Did you pull off the trim and headliner to run the wiring? Or were you able to just tuck it all in? I would like to do the same thing.
  20. nobaddays
    Good to know, thanks! Did you go with a rear camera as well?
  21. nobaddays
    Is there a reason you did it this way vs. tapping into the rear view mirror power?
  22. nobaddays
    Thanks! I bought it from R&E paint supply. Quick shipping and very good paint. I did 2 coats of primer, 3 coats of color match paint, and 4 coats of clear. Here are the details: Order Summary #--#--#--#--#--#--#--#--#--#--#--#--#-- 1 - [DUP DAP1689] Dupli-Color DAP1689, White Sandable Primer @ 5.42 USD 1 - [SMT 3680061] SprayMax 3680061, 2K Urethane Clear Coat, Aerosol @ 15.66 USD 1 - [GM WA621D] WA621D, Hudson Metallic @ 21.95 USD
  23. nobaddays
    Side shot:
  24. nobaddays
    Installed them yesterday afternoon. Really happy with how they turned out. I think they would look good paint matched or gloss black.
  25. nobaddays
    I have had the same issue probably a dozen times in 5k miles. More annoying than anything else. I only use bluetooth, nothing plugged in via cable. I mentioned it during my first oil change, and they updated the software to the latest and greatest, but it has done it twice since it was "updated". I'd have to check and see what version I have.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,809
    Total Members
    8,960
    Most Online
    TomTurtle
    Newest Member
    TomTurtle
    Joined

  • Who's Online   4 Members, 0 Anonymous, 1,031 Guests (See full list)

×
×
  • Create New...