Method2Madness

Kinda like this pic.

The heck with all that. Bought a Gentex auto dim w/compass off eBay for $65. Fed the wire into the headliner and down the RT windshield pillar to the fuse block. Literally took 25 minutes. https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F323872754730

-Replaced “dumb” mirror, with self dimming/compass mirror. -Replaced chrome emblems with black emblems -Added black tailgate letters -Removed front chin spoiler

Yeap. You'll be happy. BTW. I meant lows (low beams), not highs. I left the highs incandescent for the time being. Will probably change those to LED's eventually, but with the aforementioned combo, I really never use the highs, so I'm in no hurry.

I added the OEM fogs to my Custom and have 6K LED's in my lows and they're almost a perfect match.

My dad’s 98 S-10 and my T1.

Put some vinyl on the Bowtie. Cut it a bit short on one side, but whatever. Still looks pretty good. Ordered these to replace the chromies. Looking forward to putting them on. (Only going to replace the Silverado emblems—I’m going to remove the Custom emblem completely) And ordered this.

Got it installed. A slight PITA, but it’s in. Only casualties were a couple of clips (got more from OReileys) and ripped one of the plastic tabs that the clips attach to and had to glue the clip to the tab. Nothing TOO bad.

I canceled my order from sdparts after waiting a month and a half. Ordered from GM parts outlet.net and got it in 3 days.

Thanks! And yes, they are getting much harder to find. I waited over a month for mine.

Look what FedEx dropped off today. ? Looking forward’s to installing it tomorrow.

FYI. gmpartsoutlet.net should have 2 more in stock. They had three as of this morning and I ordered one (it shipped), leaving two. Get em while they last! https://www.gmpartsoutlet.net/oem-parts/gm-armrest-84647286

No. However the green fog light indicator on the instrument cluster lights up when the fogs are switched on. I'm not even sure the fog light button even HAS an indicator on it.

Went back out and took a pic in nearly the same spot as I took the before pic. (2” leveling up front, 2” block in rear)

Added rear QC 3.0 USB ports.

Had mine done. Love them. And yes, the BCM still has to be flashed by the dealer. They need the authorization code from GM to be able to do so.

2” Motofab up front. 2” Motofab blocks on rear. (I like a little rake) Cooper Discoverer ATP 275/60R20

Got the Motofab leveling kit installed today. 2” front, 2” rear. Love the difference it made. first pic with the tree is before second is after.

Got GM accessory fog lights wired up and activated. Installed Tyger Star Armor side steps. Motofab leveling kit came today (2” front and 2” rear) but can’t get it installed until Friday.

Got mine installed on my 19 Custom today. Cost a total of $188 for installation and programming. A bit high, yes. But saved me a LOT of headache and the programming would've been around $100 by itself. Super happy. They make a big difference in both appearance and functionality.

I went with the Tyger tri-fold. https://www.amazon.com/gp/product/B07VKF332M/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 Great cover for the money!

TWINS!! I got everything I needed for the "tow package" from Amazon and all told, it costs $376.71. Everything was plug and play and took about an hour to install (including the hitch). Here's what you need: HITCH: https://www.amazon.com/gp/product/B07Q4R4NM2/ref=ox_sc_saved_title_4?smid=ATVPDKIKX0DER&psc=1 BRAKE CONTROLLER (Can get a less expensive model, but this is the best rated): https://www.amazon.com/gp/product/B000P17NXQ/ref=ox_sc_saved_title_2?smid=ATVPDKIKX0DER&psc=1 WIRING PLUG: https://www.amazon.com/gp/product/B001NYYREC/ref=ox_sc_saved_title_5?smid=ATVPDKIKX0DER&psc=1 BRAKE CONTROLLER HARNESS: https://www.amazon.com/gp/product/B07LDBYB1G/ref=ox_sc_saved_title_3?smid=ATVPDKIKX0DER&psc=1 I also got the Tyger tri-fold soft Tonneau and absolutely love it. Was only $220 https://www.amazon.com/gp/product/B07VKF332M/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Not today, per se, but this weekend: -Added class 3 Curt hitch, Hopkins drop-in trailer plug, and Tekonsha P3 brake controller w/GM harness. (All were plug and play) -Added factory GM fog lights. Just need to finish wiring and get the BCM programmed. -Swapped the crappy Bridgestone Alenza A/S 02’s for Cooper Discoverer ATP’s (So much better) -Added CAMPARK 4K dash cam with hardwire kit. Ordered Motofab 2” front and 3” rear leveling kit. Should be here next week.

Roger that. Thanks for the reply!

Just did the reverse and license plate LED swap today with all Phillips. Has anyone noticed any parasitic drain after the swap? Any other weirdness? Thanks!