jeepincbum11

I assume all your brake recalls are up to date? Not sure about your specific vehicle but there have been a few brake recalls.

I typically go the CC route knowing that i can always contest the charge and i am not out cash right away. I know Paypal has gotten much better from a transaction perspective. Hope it works out for you.

Nothing on the BBB Google the phone # and it takes you to their website. Google the address and you get a building it looks like they are renting. Perhaps someone who lives near can do a drive by. Did anyone respond to the online chat?

Thanks but Zroads stated the silverado hinges wouldn't work on the GMC. I should have copied that part in the post. Have you tried the above mount on your GMC? did it fit?

Glad your all ok. Just curious what she hit you with? And to the other person who posted about the texting, i went right to that assumption myself. Then i thought what condition was the car? Type? etc etc. but my gut is going with cellphone use.

Mine didn't come with a front plate. I cut mine with a dremel and inserted a light. Ran the light to a remote 12v garage door switch and use my overhead homelink to turn on and off. No need for wires to punch through the firewall.

I went with the GATOR and love mine - https://smile.amazon.com/gp/product/B07XVQ3KL5/ Got mine for 539. looks like the prices have gone up.

Anyone found a set that will work with the 2020 Sierra's I reached out to ZROADS to see if the '19 Silverado model would work on the 20 GMC thinking the hinges/hood might be similar. They got back to me. Just curious if anyone else has found hood mounts similar to these available? Response - We actually have a 2020 GMC 1500 in our shop for R&D right now and they confirmed Z362181 will not work on the 2020 GMC. They will have new part numbers available for the 2020 GMC in 3-4 weeks and should have all the light applications covered. Please check back in a few weeks and we should have new part numbers loaded on the website.

Just a heads up - a simple google search showed the three results below. PART # SSICRE14 - Powered Subwoofer Upgrade System for 2014 - 2018 Chevrolet Silverado / GMC Sierra 1500 Crew Cab. Also compatible with 2015 - 2018 Chevrolet Silverado / GMC Sierra Crew Cab 2500/3500. https://www.kicker.com/SSICRE14 PART # SSIEXT14 - Powered Subwoofer Upgrade System for 2014 - 2019 Chevrolet Silverado / GMC Sierra 1500 Double Cab. Also compatible with 2015 - 2019 Chevrolet Silverado / GMC Sierra Double Cab 2500/3500. Will work in 2019 1500 Silverado LD and 2019 Sierra Limited (old body style) only. https://www.kicker.com/SSIEXT14 2019 Sierra 1500 MultiPro Tailgate Audio System by KICKER® Part # 19417163 Manufacturer : Genuine GM https://www.shopchevyparts.com/electronics/2019-sierra-1500-multipro-tailgate-audio-system-kickerreg/19417163-p-92303047.html

I hope i never need it either. So, they limit the amount of ammo in the mags in my state but not the # of mags. Correct, not allowed to get caught bringing in a handful of places, although i would feel safer if i could so it gets tucked away until i return. That pic was to show how much space was truly in the safe.

Yes sir. One of my favorites. I later added a stick on magnet to hold extra clips - not shown in the picture.

My safe looks a little different than yours

Well,. I ended up not wiring to the high beams. I purchased a 12v 433mhz remote control relay from Amazon. Wired the light bar to it and it to the battery. Programmed the homelink button to the remote like a garage door opener. No wires needed to route through the firewall. Link to relay. 12V Remote Control Switch 40A Power Switch Radio Controller, Wireless RF Receiver Switch 3000W 433Mhz Remote 2 Transmitter and Receiver,Wide Voltage DC12V - 48V https://www.amazon.com/dp/B07XK7D73Q/ref=cm_sw_r_cp_apa_i_q6CwEb7EHP941 Sent from my SM-G960U using Tapatalk

I did the same today but use hot glue to hold my charger. Sent from my SM-G960U using Tapatalk

Basically I cut a 34 inch aluminum L bar and mounted it with self tapping screws to the two lower air dam supports. I then ran L brackets with holes in it from the light to rest on the aluminum. Self tapped the two together for each side. It doesn't have to line up perfectly as the light side is adjustable. I did ensure the aluminum support bar was level. Sent from my SM-G960U using Tapatalk

I put a aluminum bar across the supports that the angle iron lays on top of. I'll try to get better pics tmrw. Sent from my SM-G960U using Tapatalk

I went lower with mine. Had to fabricate a mount. Took a couple hours. Still need to wire it up. Sent from my SM-G960U using Tapatalk

Installed a 3 inch by 22 inch curved LED light bar. Cut out the plastic under the license plate. Built a frame with aluminum angle brackets. Still need to wires it up. Plan to tie it into the bright lights. Sent from my SM-G960U using Tapatalk

There are no distributors near me. Do you have a catalog #? Can you take a couple more pics? Did you use a mounting bracket or literally mount through the plastic right into the bumper? Sorry for the newbie questions Sent from my SM-G960U using Tapatalk

How are these mounted. I like this. What brand lights are these? Sent from my SM-G960U using Tapatalk