ace ventura
-
Posts
280 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Articles
RPO
Store
Blogs
Everything posted by ace ventura
-
I have the fox 2.0 coilovers for 2” level. Can strut spacers be added to achieve additional lift without affecting ride quality? tia
-
Good point, I have not gone to the dealer. I will see if they can come up with some part numbers.
-
I’ve checked the threads and I don’t think anyone has figured out how to get OEM tow mirrors for the 24 with power fold, blind spot camera, etc… Does anyone have part numbers or info? besides the boost mirrors.
-
The pinion bearings and the side ones. I’m thinking it’s a no too that GM would do anything. It’s just disappointing. I bought the truck new and have dealt with quite a few problems.
-
I only have 55k miles on my 14 Silverado. The rear end bearings are shot. Do I have any chance of having GM pay for part of this repair? I feel these failed very prematurely.
-
I'm wondering that because you changed the harness that you need a different switch maybe the one that ends in 411.
-
From the album: muffler pics
-
-
-
From the album: muffler pics
-
From the album: muffler pics
-
That would be too cool but I doubt just replacing the switch and the mirrors would change that but....
-
From my research that is correct. You need some DL3 mirrors and switch 23154702. I've reached out to smokey1300 who has been successful at this. You do need to look at the female end of you harness within your door to see if you have the pins for the powerfold. Looks like pin 18 from the diagram above. The puddle light and signals will not work without changing the door harness though. I don't think anyone has chimed in that they replaced the door harness and got the signal and puddle lights to work but your also looking at about $80-$90 for each harness.
-
Finally the solution to add power folding mirrors to an LT. The switch is the key. I was trying GM #22754411 for the switch and this was wrong. You need drivers door switch (23154702).
-
I printed out the Link above with the part numbers etc for he fix and gave it to my dealer. They performed the fix and I'm Glad to report my seat doesn't move at all!!!
-
I installed the Volant intake about two months ago and wanted to pass along the review. Super easy install, looks great, and sounds super mean when you get on it. Problem is that when towing it's completely annoying. It's a drone in the cab the whole time. If you tow a lot I would really recommend not getting one.
-
Were they able to tweak the shift points and firmness?
-
This won't work with the Auto-start but i noticed in the manual their is a fast idle option in the manual on page 9-28. I would think a faster idle would warm it up faster.
-
Looking through the manual it states when remote starting the vehicle it remembers the previous settings. This may take some experimenting but what if you tried some different settings like activing the recirculation mode, manual mode opposed to auto, or possibly closing some of the vents in the dash with the thumb wheel. I learned something looking for this too. It states the rear redefroster will activate when its cold enough but the light does not come on during remote start. Hope this helps.
