Nice find! They look brand new. I wish I could have found some when I was looking. Post some pictures once you get them put on. Sent from my iPhone using Tapatalk
I have a monster swivel hook that is held on with retaining rings. Not a lock, but not many people carry around retaining ring pliers either. Sent from my iPhone using Tapatalk
Reporting back that after shocks settled I have a slight rub with 295/70r17 Toyo rt’s and method 17x8.5 with a 0 offset. Shocks were set for 2.5” of lift. The rub is very minor and only at full lock in either direction. The rub is only on the felt liner and could easily be fixed with zip ties. Sent from my iPhone using Tapatalk
Thanks! I’m happy with the way it turned out and was super easy to install. The two braces were underneath the plastic guard. I had to take them off for the new skid plate to fit flush and for the bolts to line up. Sent from my iPhone using Tapatalk
Detailed truck and replaced factory splash shield with a CST aluminum skid plate. Picked up the skid plate locally for $100, can’t beat that. Sent from my iPhone using Tapatalk
Here’s the harness. https://www.gen5diy.com/collections/14-18-silverado-gen3-products/products/14-18-silverado-drl-harness Sent from my iPhone using Tapatalk
On the 14-15 trucks, the hid’s will be on during the day because they are set as the drl’s. You can buy a drl harness that can eliminate it or switch the drl function to your fog lamps. I have the morimoto kit and have just left them as is. We’ll see what kind of life I get out of them. The lifespan will definitely be shortened though due to being switched on/off a lot more than neccessary. Sent from my iPhone using Tapatalk
Yes I will get pictures tomorrow, sorry it’s already dark outside. I did go out and measure center hub to fender though. Before-21.25” After-24.00” Sent from my iPhone using Tapatalk
Just got done leveling my truck today. Specs: king 2.5 coil overs set at 2.5”, camburg UCA’s, king 2.5 piggyback rear shocks, 295/70r17 Toyo Rt’s with 17x8.5 method nvs. Sent from my iPhone using Tapatalk
I got my fx-r projectors and morimoto 5500k hids in my oem ltz housings and I don't think my cutoff line is right. When I installed them it seemed the bulb could only go in one way. I'll attach a few pics. Any help would be greatly appreciated. Thanks!
Does anyone know how to connect the orange and black wires in the picture attached to the oem input? I have a 2015 silverado and this is the morimoto kit bulb wires. I believe they need to plug into the wires that originally went to the halogen bulb. Am I missing something? Any help would be greatly appreciated! Thanks
I recently did the swap on a 2015 with the gm USB cable and only have charging at the front 3 USB ports. I have everything functioning except for data to the front USB.
Sent from my iPhone using Tapatalk
Just wanted to bump this thread for another satisfied customer of the plug and play harness. Phil (pgamboa) was great to work with and his harness was perfect! I wouldn't have even tried this mod without his help. Very happy with how it came out. Thanks again Phil!
Sent from my iPhone using Tapatalk