Flatblack83

I messaged wams and he said the 20-21 are hard to get and will take a little longer. The 19s tho are a lil different and are easier to get

I'm in the middle of the same deal. My trucks a 19, this worked on the 20 and 21 but not yet the 19. The wheel for the t1 19 on gm parts direct isn't the same wheel for the t1 20-21. So wish me luck...!!! I ordered the wams cluster, 84755546 steering wheel, silver piece for the dash to match the wheel and the harness from Dr harness. I'll be doing it as soon as the clusters here. Looking forward to see who else has done it or tried it on a 19.

Mine read in the 12s at 1st with bfg km3s 35-12.50-20. After calibration and 2 tanks of gas its in the 15s. The pulsar worked good for me, 15s isn't great but sounds better than 12..haaaahaaa...

For 19 and up silverado/ Sierra 1. afm/dfm disabler, works perfectly, red led 125.00 shipped 2. Pedal commander, works perfectly, comes in original box. 150.00 shipped Will take offers, let me know, thankyou...

I have the icon stage 4 with the tubular control arms, I didnt cut the stops off. When I put my truck on the lift, the suspension hangs and doesn't get that close to need to cut em off.

Ebay, I think with u bolts like 75-80.00.

I went to bfg km3, 35 12.50 20. I run 34psi in them, so far they wear ok but they do have noise but for an aggressive tire they aren't as bad as you would think. I just reached 7500 miles with them and can't complain at all, it did awesome in the 20 plus inches if snow we had

84793824 should be trailboss axles.

Exactly why I said that its usually with bigger tires. Like you said, stock running a 50lb tire and now an 80lb tire. Thats a big difference. Plus people with stock trailbosses and at4 trucks do have those problems but it was with bigger tires and who knows with what kind of punishment..lol.. There was a few on Facebook, they don't cry as much tho since its warranty work. They don't have cv problems tho since they have different lengths. I'm not arguing here who knows more, I'm out after this. I just put pics up and things I've seen. I'm not the guy to put a 12.00 leveling kit on my 40k dollar truck, especially seeing those pics. Each their own...carry on, thankyou.

https://www.roughcountry.com/gm-forged-aluminum-upper-control-arms-29501.html Look down the bottom, it says 3-3.5 lift. These i had to use a 1/4 spacer to clear 295 60 20s. The ball joint was 1/8 inch away from the sidewall. I do think tho there is plenty of other companies around that price range.

I think the rc arms are setup for the 3-3.5 lift range last I looked at them. I actually had them last year with my icon stage 1. With those it aligned fine at 2.5 inches of lift. I sold them when I sent my icon back to be converted to stage 4. The rc arms are really nice for the money

I sent the last 4 pics, 2 with a regular truck with a 2 inch and 2 bosses. That's a few, you do what u think u should do. Its just ones opinion.

20 trailboss, lift kit to put the ball joint still at stock angle.. that didn't work.

19 1500 2 inch level

Here's an at4 with a leveling kit.

Here's a 2 inch motofab

There are so many on Facebook with problems with those arms from everything besides stock. Most of it tho is with the bigger tire like 35s. If you never seen how bad a blown upper ball joint or one ripped off the arm looks you might want to. If it was me it would be a piece of mind to just do ucas.

Thanks Duramax3oh...! Yes I do, I have the stage 4 setup. With the tubular control arms 2.5 coilovers and 2.5 rear shocks with the adjuster. They are really nice, it rides firm but not harsh. I do tho have it turned up to 3 inch tho. I keep the fronts on setting 2 and the rears at the softest setting until I pull my car trailer and then I set them at 5.

You will love these headlights.!! The resistors are mounted on the metal brace next to the headlight. If you look you can barely see them when you look under the hood. The wire isn't super long for them so that was about the only place to put em. My gm fog light kit plugs in just like the bowtie so you shouldn't have a problem. It plugs in between the passenger light and the harness.

Here's my 19 custom, I did the swap about 9 months ago. Its worked flawless, these are high country headlights with the trailboss gloss black grill center.

I bought it all from ebay, looked for the best deals. If you sell all the custom parts you will come out pretty good. Mine came to about 500.00. Here is an approximate break down. The light prices are all over the place. I didnt know mine were high country till they arrived. 1k for the lights 250 harness 400 grille( color matched) 1650.00 Sold on ebay Custom lights 400 each 350 grille 1150.00

No problem, anytime...!!

Look for this.

Rear icon dynamics 2.5 cdcv reservoir shocks. These on #3 seem to soak up anything u can hit..lol. After they are too stiff. I run the fronts on #2 seem to work perfect, firmer than stock but not too stiff.