Jump to content

RST Mike

Member
 View Profile  See their activity

  • Posts

    57

  • Joined

  • Last visited

 Content Type 

Everything posted by RST Mike

  1. RST Mike
    I left the resonators on more for drone reducers but may switch it up after driving for a while.
  2. RST Mike
    Here is a video clip of a cold start the day after I added a Flowmaster Super 10 to my 2020 5.3 Silverado. All I had done was a muffler swap. Original pipe with mesh resonators is still in place. Sounds great and aggressive when accelerating and starting up but not too crazy when cruising. Haven't taken a long highway trip yet so not sure about drone on a long trip but I have been on short highway trips and the drone is very, very minimal, can't even hear it when music is playing.
  3. RST Mike
    Hi Jeremy, I am looking into this mirror as well for my 2020 Chevy RST package with the manual dim mirror. Wondering if you went this route and if it worked? Thanks!
  4. RST Mike
    Good to know. I will keep an eye out for that. At least they have a 5 year warranty. I also don’t live in a snowy location where salt is used so that may help.
  5. RST Mike
    Thanks man! I almost went with the powder coat finish too and changed my mind last minute. It wouldn’t be to complicated to apply bedliner coat to yours if you have some free time down the road.
  6. RST Mike
    Just installed the Go Rhino RB20’s with the Bed liner coating. I’m really happy with how they look... I wanted something high and tight to the bottom of the cab. 
  7. RST Mike
    Just installed the Go Rhino RB20’s with the Bed liner coating. I’m really happy with how they look... I wanted something high and tight to the bottom of the cab. 
  8. RST Mike
    Just installed the Go Rhino RB20’s with the Bed liner coating. I’m really happy with how they look... I wanted something high and tight to the bottom of the cab.
  9. RST Mike
    Thanks man! I’m glad it worked out so well for you!! I agree that third one back is frustrating because it’s right next to that hanger. It is pretty cool that it makes that deeper tone.
  10. RST Mike
    I would say about 1.8-2”. They are adjustable up to about 3” I believe.
  11. RST Mike
    Bottom setting just to level. The springs give about 2” of lift by themselves.
  12. RST Mike
    Here’s a few more pics in better light.
  13. RST Mike
    Awesome, thanks! Truck looks great!
  14. RST Mike
    Just had my Eibach kit installed today. Running Nitto Ridge Grapplers 285/55R20 on stocks wheels. First impression is a good one... handles bumps very well but need to drive more and break them in to get a good feel.
  15. RST Mike
    I have my eibach kit ordered. Wondering if any of you have pics of the rear shocks installed?
  16. RST Mike
    Lasfit has some great LEDs. Might give them a shot. I replaced my front blinkers, backup lights and license plate lights on my 2020 RST 1500. They also just came out with some amazing laser cut floor liners for crew cabs at a reasonable price (they run promos all the time). Here’s a link to their site: http://lddy.no/msyj
  17. RST Mike
    Lasfit has some great LEDs. Might give them a shot. I replaced my front blinkers, backup lights and license plate lights on my 2020 1500. Here’s a link to their site: http://lddy.no/msyj
  18. RST Mike
    If you guys are looking for an alternative, Lasfit just came out with new floor liners that are really nice for 2019+ Crew Cabs with the under rear seat storage box. They are running a Father's Day special right now where you get $50 off the $149 price with free shipping using code FORDAD-2 at checkout, so you can get front and rear floor liners for $100 plus tax and they are great quality. (The back is one piece that goes all the way across) Here's a link to Lasfit's site: http://lddy.no/msyj
  19. RST Mike
    Lasfit just came out with new floor liners that are really nice for 2019+ Crew Cabs with the under rear seat storage box. They are running a Father's Day special right now where you get $50 off the $149 price with free shipping using code FORDAD-2 at checkout , so you can get front and rear floor liners for $100 plus tax and they are great quality. (The back is one piece that goes all the way across) Here's a link to Lasfit's site: http://lddy.no/msyj
  20. RST Mike
    I have looked at the carplay2air as well but just not sure about it. There is a thread on here about that where a couple people are about to test them out and some have used it and don’t have great reviews. Here’s a link if you want to follow:
  21. RST Mike
    I agree! Unfortunately, my understanding is that both CarPlay and android auto must be connected with usb to work. Sounds like we are in the stone ages still. ?
  22. RST Mike
    For me I have the jump seat and didn’t like the usb cable strung across the middle of the truck because you need it plugged in for Apple CarPlay to work.
  23. RST Mike
    I purchased the Scosche Magic Mount and if you don’t have the trailer brake it works perfect on that blank panel. It sticks on with adhesive back and you just put on provided skinny metal plate to your phone to make it connect with magnet. I like this location because it doesn’t block any buttons on dash and it’s close to the USB ports (BTW I use the USB C port). Here’s link to the mount: https://www.amazon.com/dp/B01DBAVHH0?psc=1&ref=ppx_pop_dt_b_asin_title
  24. RST Mike
    I would imagine it should tone it down a bit the more you remove. I notice a more throaty sound from stock which is just about perfect with the stock muffler.
  25. RST Mike
    Did you remove “flapper” as well?

  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,725
    Total Members
    8,960
    Most Online
    Griffin Donovan
    Newest Member
    Griffin Donovan
    Joined

  • Who's Online   1 Member, 0 Anonymous, 635 Guests (See full list)

×
×
  • Create New...