Jump to content

Bonker

Member
 View Profile  See their activity

  • Posts

    165

  • Joined

  • Last visited

 Content Type 

Everything posted by Bonker

  1. Bonker
    to all the guy's who have installed Billstiens, what is the preferred set up? 5100 adjustables for the front and 5100 regular for the rear or another choice for the rear. Thanks in advance
  2. Bonker
    Front of Truck no Grill
    Great work and detailed instructions
  3. Bonker
    Check out my post on page 8 post number 117
  4. Bonker
    I am running 35 psi for 20"
  5. Bonker
    In Canada GM are using a product from Lloyds called Kryptonite
  6. Bonker
    That's not good the hose running over the oil filler cap to the intake, why don't you try routing it alongside the hose coming from the throttle body and then route it up the valley it would look much cleaner, off course you will need a new hose. Just my 2 cents.
  7. Bonker
    No change in sound on mines.
  8. Bonker
    I just check the dipstick and empty and clean the can when required.
  9. Bonker
    Installed a set of Timbren SES on the rear of my truck and finally installed my catch can since the weather has warmed up above zero
  10. Bonker
    Probably hard particles of carbon floating around in the cylinder
  11. Bonker
    Best to hop the border and buy a few cans
  12. Bonker
    $75.00 from GoGoautoshop for V1 can, google it
  13. Bonker
    I bought a boat hook from Princess Auto here in Canada, its great for pulling stuff forward that slides to the front of the box under heavy braking
  14. Bonker
    I got it from work
  15. Bonker
    I have four layers of mesh with a 1/8" spacer in between them,(Key Rings) there is no vacuum restriction it flows much better than the stainless steel pot scrubbers.
  16. Bonker
    See my pictures on post 117 on page 8
  17. Bonker
    I wouldn't use steel wool I used stainless steel perforated mesh and cut the discs to fit the filter
  18. Bonker
    Need to check your oil level frequently.
  19. Bonker
    Any Canadians on here who have done the Black Bear Auto Cal tune? Can you please post your experience and satisfaction with this tune. Thanks.
  20. Bonker
    Don't mind the finger condoms Ha Ha they are there just to keep the crap out of the can
  21. Bonker
    I finished up fabricating my catch can mounting bracket today. I am just waiting for my spare foul air hose to arrive from the USA so I can get the quick connect fittings to do the install.
  22. Bonker
    Glad to hear you solved the suction noise problem southern_sierra, perseverance always wins
  23. Bonker
    I agree
  24. Bonker
    The O ring should be at the end of the thread where the thread meets the smooth finished outside diameter of the can
  25. Bonker
    I will be following the diagram with the red arrows I feel it makes more sense the dirty air goes through the inlet and filter the oil and water condensate and drop into the can base with the clean filtered air being sucked from the can into the manifold. same principle as the air filter on the truck.

  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,736
    Total Members
    8,960
    Most Online
    pimafe6931
    Newest Member
    pimafe6931
    Joined

  • Who's Online   1 Member, 0 Anonymous, 874 Guests (See full list)

×
×
  • Create New...