Dub1796

Yup, that's actually better then mine. That's their new flagship, dr900. Similar features as mine, but it records in 4k and has a better wifi processor

Blackvue dr750s 2ch. 1080p with front cam @ 60fps and rear cam @ 30fps. I have it hooked up to a power management pro, which let's it run full time without draining the battery. Blackvue has the has one of the most user friendly apps on any phone platform. I sell and install them all the time

I just took off the oem 22s and I would say the ride quality is almost the same. With the rear lowered, the truck isn't top heavy in turns anymore. Ya i dont like leaving it outside, but my dashcam is hooked up to my WiFi, so I got 24hr motion sensors and notifications lol. Also, my truck has a tilt sensor in it that texts me. Bc the truck is summit white, I was able to use Plasti dip on the emblems. I use to paint them, but they would get chipped every winter and I would have to repaint them. Then I switched to vinyl, but the vinyl would get dried out bc of the sun/heat and chip/crack. Plasti dip is the most durable product I've used on emblems

Drop shackle and leaf block removed in the rear. The front will be lowered with belltech struts when I get time

Yup s213 8 ball on 305/35/24

Just up the coast from you. I'm in Vancouver, BC

I'm working on a 2015 silverado hd ltz right now and you can dim the reverse image. Wierd how this hd has it stock

Built this mount. Plugged into front usb so I can use android auto

Is the belltech strut at the lowest setting? The strut is all you used to lower the front? I ask bc I need to install mine, and am wondering if I should only lower it an inch. Thanks

Ill take that trade lol, i prefer the one piece that my 2014 had. When u come up to Canada for the swap, bring me a set of 24" strada codas with you from cali haha

My 2018 has them....... I gutted my 2014 and made sure to swap the center console before trade in hahaha

Color matched fender trim, emblems, and gap between hood and grill. Still have to color match red part of all terrain emblem. Lowered the rear 3.25" waiting for Belltech lowering strut for the front.

Awesome, thanks for the confirmation. What are your thoughts on the ride quality afterwards?

After lowering the rear of my truck with belltech shackles and block removal, i have decided i want to lower the front 1". Has anyone successfully used belltech lowering strut part #25004 on 2018 stamped LCAs? Belltech only shows that the drop spindles are compatible. TIA

the end product is similiar to to the factory coloring used on the terrain portion of the decal. it does not look like the gloss black of the truck but it flows nicely bc it blends in. I decided on plasti dip instead of the new decal bc I had extra stuff laying around and I didnt want to make a jig to install the new decals evenly on both sides of the door lol.

camera phone pic

Yes I blacked out the all terrain emblem with black plasti dip and glossifier. If you don't want to try it, there is a person selling black all terrain badges on ebay for $20 http://www.ebay.com/itm/CHROME-BLACK-ALL-TERRAIN-ENGINE-RACE-MOTOR-SWAP-BADGE-FOR-TRUNK-HOOD-DOOR-C-/371188072230?pt=Motors_Car_Truck_Parts_Accessories&hash=item566c887f26&vxp=mtr

subscribed

My pnp hid kit from retrofit source works perfect. Never had an issue yet but it is only temporary until I can get my retro fit done

Could I get a pic and price for the fxr bracket pls.. Do these brackets require complete dismantle of the headlight or can they be installed from the back like the other retrofits have been performed? What are the brackets made of?

I have already attempted the retrofit with my fxr's. After cutting my headlight apart, i found the projector does not sit flush bc of the oversized front cap. I have done retrofits before and i refuse to use glue to hold them in place lol. That was how i saw the diy was done on hidplanet. I havnt been on there for awhile and there may be a new diy available. I will try again when i have more time but i may try and get a bracket made to hold the projector to the oem mounts

What do you plan on doing with the oem projector after your retro fit? I have a set of Morimoto minis and would like to see if the lens would fit the oem projector. I also have a set of fxr but am reluctant to install them until i see an install that has a nicer fitment into the oem headlights