Jump to content

z1boss

Member
 View Profile  See their activity

  • Posts

    569

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by z1boss

  1. z1boss
    Damn, I guess your gonna have to trim the metal
  2. z1boss
    Is it rubbing on the metal or on the carpeted fender wall?
  3. z1boss
    So I just found the video. Apparently, I was mistaken as he mentions a 2x6 not a 2x8 or 10. Www.youtube.com/watch?v=yrhecGxISos
  4. z1boss
    Seems like it. You could try to contact Fabtech and see if you can return the kit but I doubt you'll have any luck on that route.
  5. z1boss
    Yes, saw a video a while back where one of the engineers was talking about the new bed and I remember him specifically mentioning dividing the bed with a 2x8
  6. z1boss
    Hm, I would try trimming the would down a quarter inch at a time until you get it to fit in. Also the width of the 2x10 may not allow it to turn and squeeze in which is why I would recommend a 2x8 as GM specified in their marketing of the bed
  7. z1boss
    You need different rims/tires or some trimming. There are 4 sizes listed on the Fabtech site for this lift. Although it's not marked, the Trailboss is the one that fits the 35x12.5, the 295 width tire is for the AT4. The wheel wells are smaller as I mentioned earlier. The Fabtech kit also has a 5" backspacing which your 22x10 doesnt have. The Rough Country kit accepts your rims offset but not this kit so in reality the best option for those looking to lift the Trailboss/AT4 is the Rough Country kit not the Fabtech one. Fabtech: Rough Country:
  8. z1boss
    You need to cut the length of it to fit. A 2x8 fits but it has to be the length of the inner bed. I dont know the dimensions off hand but 72 inches seems too long.
  9. z1boss
    Ok but what size tire?
  10. z1boss
    Also, what size tire are you running. The AT4 has a smaller wheel weel opening than the Trail Boss so you cannot run as big of tires.
  11. z1boss
    Yeah, @mikedeezxxx is right. I believe your supposed to use 2x8s
  12. z1boss
    Have u tried running it without the spacer? The spacer may be pushing it too far out.
  13. z1boss
    The resonators make a huge difference in terms of loudness. You may not like just the flow master if your looking for loud sound
  14. z1boss
    All Trailbosses have them removed.
  15. z1boss
    Looks great!!
  16. z1boss
    It is the camera one.
  17. z1boss
    Part number is 13530415. Had a dealer check for me. Price is $800 without any discounts
  18. z1boss
    Ok I hoping these were the exact same as stock just black. I'll wait and see if they come out with anything in the near future. Thanks.
  19. z1boss
    Link please. Are they the same size as the factory ones?
  20. z1boss
    Looks good! Did u just wrap it?
  21. z1boss
    That is too high. Try another dealer. I believe the alignment and calibration are included. Check the description in the link.
  22. z1boss
    It's the exact same setup as on the Trailboss. I love the way it rides, smooth on the ride and absorbs bumps well. 15k miles and no complaints about the ride.
  23. z1boss
    Following.
  24. z1boss
    Ok you said the GM 2" level kit and I thought you were referring to the GM 2" lift kit as GM does not make a level kit.
  25. z1boss
    If u paid to have the full kit, I would definitely go back for the rear block. The front is not leveled, it's a full suspension package with different shocks and springs. You can always level the front on top of what you have.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,916
    Total Members
    8,960
    Most Online
    erickn520
    Newest Member
    erickn520
    Joined

  • Who's Online   4 Members, 0 Anonymous, 1,693 Guests (See full list)

×
×
  • Create New...