Jump to content

AMPRG

Member
  • Posts

    158
  • Joined

  • Last visited

Everything posted by AMPRG

  1. I sent an email to the address you shared and got my build sheet in couple of hours. Thank you very much for sharing. Surprisingly, my truck has VTI code too, but the QR code doesn't list it. ? Now I'm purely confused with the temp. The only thing I can see is different thermostats for the same engines, or some defects in my engine, since it runs in low temperatures at all times ?
  2. My truck has 2 QR codes. The big one is the VIN only, and the small one includes VIN and RPO codes. I had to install a 3rd party free app on my Samsung phone to be able to read the codes.
  3. You can also scan the QR code on the door (driver side). It will list the RPO codes along with the VIN.
  4. For me, from Mira Loma to LA (50 miles) took more than a week. That's depends on the trucks (carriers) availabilities. You should ask your tge dealer push them. They need to contact business center and ask them to expedite, if you don't get it in a week.
  5. I checked mine. I don't have code VTI. Mine takes forever to reach 180. It sounds like VTI is for mainly 6.2L and some 5.3L Z71 packages. In southern California I prefer not to have it ?
  6. Then how does your temp gage dance?
  7. Read this: http://gmauthority.com/blog/gm/general-motors-technology/gm-aerodynamics-technology/gm-active-aero-shutters-technology/ May be this is the reason. Look at your PRO codes and see if you have VTI in there. I think you should be OK. It won't hurt if you check with the dealer too.
  8. My cluster is exactly like yours (digital gages). But your lowest temp is my highest. Usually, mine is between 185 (2 lines before 210) and 197.5 (one line before 210). In the past 6800 miles, I saw more than 210, only one time which came down immediately. By the way, why your RPM is 2000 on 70 MPH with cruise control? It should be around 1500 if you have 5.3L with 8 speed, and below that with 6.2L and 10 speed. Unless you were driving up hill. As I see, you were driving 9 miles in high RMP. Depends on the weather, this should be normal, specially if you are carrying some loads or towing.
  9. My LTZ 5.3 DFM is so low. may be around 180 and lower most of the time. In the past 6800 miles I barely saw 200. I'm not towing any load.
  10. This is fantastic. Thanks a lot!
  11. One generation is missing between the first one and second one from left. My 2005 was different.
  12. This isn't apply to this topic, but since you are going to the dealer, you should ask them to enable "After Blow" function for your HVAC. This was enabled for previous generation by default, but you need to ask the dealer to enable it for new generation ?
  13. And this is for the back seat.
  14. Here you go! I'll send more.
  15. Well I just got my truck back yesterday. The noise from B pillar was fixed by adding some insulation materials. Noise from the back seats were due to the bolts holding the seats. They remove the back seats, put Loctite on the screws, and tied them back. The truck is very quiet now. Now I feel that I'm driving brand new car after 7000 miles ?.
  16. I believe there is a recall for reprogramming the eboost. You should call the dealer.
  17. Me too. I ordered end of October and got it Jan 21st. I'm so happy with my order. I didn't have to pay for the stuff I never needed them. Instead I ordered items that the dealers usually order them for their regular sales.
  18. I found very good quality plastic letter inserts in chrome. These are not decal types. https://www.bdtrims.com They sell them in different colors, and in two types: Flat and Domed. I ordered Domed and I'm so happy with the quality.
  19. Yes, mine took more than a month. There should be some recalls that they need to address before shipping the truck. Ask them for the event code.
  20. That happened to me 2 times and fixed by itself, overnight.
  21. You should chat with them at the morning. Their afternoon people are absolutely clueless. No credit to their morning staff. But they're a little bit better. You can ask your dealer to find your event number also.
  22. Do you have your order number for GM? If not, then your dealer screwed up everything and you should change them. If you have the order number, then you can't do anything until GM give you the update. Ask the GM about your current "event number". Then you can check it in this list: https://www.google.com/amp/gmauthority.com/blog/gm-order-tracking/gm-order-event-codes-and-definitions/amp/
  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,720
    Total Members
    8,960
    Most Online
    Wasierra1500
    Newest Member
    Wasierra1500
    Joined
  • Who's Online   0 Members, 0 Anonymous, 663 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...