Bullseye07

I’ll answer my own question. Installed the fox 2.0 kit which raises the front 2”. Looks great and rides outstanding. Big improvement over stock.

Got the fox 2.0 kit installed yesterday and put on some 275/70/18 terra grapplers on. Love the way it looks and the ride is outstanding. Huge improvement over stock.

I was originally planning on bilstein 6112s and 5160s but they’re out of stock everywhere. The fox 2.0 were only a little more and in stock so went ahead and ordered them.

Has anyone done the fox 2.0 coilover kit?

Never skip leg day

Has anyone installed the fox performance 2.0 kit? Considering buying it and would like to know about ride quality and what clips y’all are using to level?

My 2021 RST came with 18” wheels. Anyone else? I’m about to level it and need get some more aggressive tires.

I’ve owned trucks ever since I started driving and never knew this was a thing until today! is one better than an other? I see maxseal and truxseal. Priced about the same.

I installed a bakflip mx4 bed cover on my 2021 RST. I really like the bed cover, but the first time I took my truck down a gravel road the inside of the bed was absolutely covered in dust. I don’t believe that the bed cover is what’s letting the dust in. I believe it’s coming in through the gap at the bottom of the tailgate between it and the bed. Has anybody else had this issue? Know of a fix? I’m considering installing a piece of weather stripping or something in that gap to block out dust.

Thanks all. Ended up getting the du ha from Taco_ninja today. Good guy to deal with.

Still better than cloth ¯\_(ツ)_/¯

Either one. Like I said, they look similar to katzkins which I installed on my last truck. These are seat cover replacements, the clazzios slip over the existing. I’m looking to see if anyone has experience with either.

I’m the same way. Personally, if I have guns in the bed my wife is usually with me. One of us always stays with the truck. If I have guns in the back and I’m by myself, I don’t go to any stores. I’ll stop for gas, but that’s it. Just have to learn to be prepared for your trips ahead of time if possible. In honesty, the type of cover doesn’t matter for security. If a thief wants in, they’ll get in- and it won’t take much to do it.

So since I’ve traded in my old truck and have a new 2021 RST, I’m looking at new seat covers. I had katzkins on my last truck that were nice. I’m considering going a little more cost friendly this time around. That being said there’s a couple that I’ve seen and wondering if anyone has some real life experience and pictures showing how well they fit. I’m looking at the clazzio covers as well as these unbranded covers on eBay that look eerily similar to katzkins. Maybe a Chinese clone? Anyways, if anyone has info/pics on these two or another leather/leatherette option, let me know. Thanks in advance. https://www.ebay.com/itm/174756901728?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3Db97129cb3885440184d52f360fecaad2%26pid%3D100675%26rk%3D1%26rkt%3D15%26mehot%3Dnone%26sd%3D174756901728%26itm%3D174756901728%26pmt%3D1%26noa%3D1%26pg%3D2380057%26brand%3DUnbranded&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3A3e961216-adaa-11eb-9463-a67b300126cd|parentrq%3A3cd474c31790a69f8931dae4ffefbd4b|iid%3A1&fits=Year%3A2021|Make%3AChevrolet|Model%3ASilverado 1500|Trim%3ARST Crew Cab Pickup 4-Door|Engine%3A5.3L 5328CC 325Cu. In. V8 GAS OHV Naturally Aspirated|Submodel%3ARST|Engine - Liter_Display%3A5.3L

So I recently traded in my 2018 LT for a 2021 RST 4x4. It came with the gm rear underseat storage, but that thing is tiny. Are there any other bigger options out there? Like that actually goes to the edge of the seat. Doesn’t need to be lockable or anything, just bigger. thanks in advance.

I haven’t purchased yet. Found some nice takeoffs with tires. Would just replace the ram center cap. Sent from my iPhone using Tapatalk

Odd question, but is anyone running dodge wheels? Same bolt pattern. Only difference I see is my Chevy wheels have 24mm offset and the dodge wheels have 19.1mm offset. Sent from my iPhone using Tapatalk

Do you think there’d be any concern with running the 5100s on say the 1st setting(next to lowest) with the lift kit as well? Sent from my iPhone using Tapatalk

I was actually looking at their stage 2 kit (2.25”) with bilsteins for my new shocks. Not quite sure if that’d give me enough clearance though Sent from my iPhone using Tapatalk

Has anybody installed the kryptonite stage 2 leveling kit? Part number KR13STAGE2. Considering pairing that with new bilsteins all around. Sent from my iPhone using Tapatalk

Somehow I missed this thread when looking.So here is the situation: I have a 2018 4.3 2WD that just hit over 60k. It appears that my struts have gone bad and need to be replaced. I figure while replacing them it would be a good time to lift/level and add bigger tires. I’ve found some nice wheel/tire take offs with Nitto terra grapplers in 275/65/20. I’ve seen that people have them fit with a 2.5” Leveling kit. Correct me if I’m wrong, but I’ll need new UCAs going at 2.5, new struts(because mine are old), and the kit. Does anyone make a kit that has all of that, doesn’t ride horrible, and isn’t outrageous in price? What would you guys do? Sent from my iPhone using Tapatalk

I’ve researched and read tons of posts on this before creating this one. So here is the situation: I have a 2018 2WD that just hit over 60k. It appears that my struts have gone bad and need to be replaced. I figure while replacing them it would be a good time to lift/level and add bigger tires. I’ve found some nice wheel/tire take offs with Nitto terra grapplers in 275/65/20. I’ve seen that people have them fit with a 2.5” Leveling kit. I remember seeing RC specifically. Correct me if I’m wrong, but I’ll need new UCAs going at 2.5, new struts(because mine are old), and the kit. Does anyone make a kit that has all of that, doesn’t ride horrible, and isn’t outrageous in price? What would you guys do? Sent from my iPhone using Tapatalk

Your truck looks great. Is the suspension otherwise stock? Sent from my iPhone using Tapatalk

Shout out to [mention=159655]pgamboa[/mention] . He helped me through the process of where to get my mirrors and what all I needed to install. I followed his video which of course covered everything perfectly. His instructions for the tow mirror modifications were also easy to follow. I installed mine yesterday and they perform flawlessly. Thanks again for all the help along the way. Sent from my iPhone using Tapatalk

This may be a stupid question, but wouldn’t it be easier, cheaper, faster, more safer, etc to just trade/sell the 4.3 and get a 6.2?? Trucks these days aren’t like the 80s where you just drop in another bigger engine and everything works. There’s too much electronics and wiring that would have to be altered. Seems like a crazy task, but hey, more power to you. Sent from my iPhone using Tapatalk