Aircraft800

I didn't change any fuse, I haven't seen any issues.

No updates? Maybe a matrix switch like I use for my TV?

Do you know if the wiring harness is there? It should be behind the rear license plate. Mine has a dummy plug right next to the module, I'm guessing if your truck doesn't have the module, your plug will be plugged into the dummy.

The 85573256 OEM Camera works on the 2024-2025, it’s the newer camera.

It looked like there were a few options on eBay, even one that included a bracket that was listed at $70, exactly the same camera and throw the bracket away. 85573256 OEM Camera

DELIVERED 85573256 OEM Camera Projector For Chevy, GMC S... $96.88 https://www.ebay.com/itm/266947049003?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=WDrcqekURBi&sssrc=4429486&ssuid=S3bvHNaFRD-&var=&widget_ver=artemis&media=COPY

Thanks again for the help!! I got it all worked out. Someone mentioned the 118 inch height bug, I reset it to 117 inch and changed the angle of my camera to 35 Deg from horizontal (Not from the wall which I accidentally did) and it calibrated in 200 yards!

I’ve got the camera swapped out, now I’m working on getting it to calibrate. I placed the camera at the same angle I had the last one, I can just see the top of my bumper, but it won’t calibrate. I went back and looked at the setup guide and it appears I measured the 35 deg from vertical, not 35 deg from horizontal. I didn’t have any issue with the old setup, but maybe fixing this will help.

Thanks again for all the help! I just installed the correct camera for a 2025 into the old housing from my 2023. 85573256 OEM Camera for Chevy Silverado, GMC Sierra 2500, 3500 It now has a picture, but I’m struggling with calibrating. I towed it 5 to 6 miles, but it never finished. I checked old pictures to ensure I have the same camera angle, and it looks to be the same. I was trying to find the 2025 Camera setup instructions to see if the 35 deg angle or the measurements changed, but I was unable to find it online. Here is my old setup with my 2023 truck with everything working, and the second is of the new camera with my 2025 truck working. I changed the angle slightly up since this photo so it just includes the bumper like my old photo, but it still won’t calibrate. I also read that I need to be on streets with both lines, but the road I tried to calibrate on only has a centerline. I’ll try again next week. Old camera with 2023 truck New camera with 2025 truck, no luck calibrating yet.

I found one on eBay, should be here this week. I'll update once I get the correct one installed. Thanks for the help!!

Darn, I got some bad info. It's even listed on the site Incorrectly. Here are a few examples:

I tried to order the 85573256 camera and was told it was replaced with 26445241. I installed it today, no help.

I was having the same problem with my 2025 Denali 2500 HD. I have a Pixel 8 Pro. It would act like it’s charging, then I’d hear the tone again like it’s charging and turn the screen on. The screen would go dark for a bit, then wake up with the tone and show charging again. It would kill my battery, the cycling screen on and charging sound. I didn’t have any problem on my 2023 Denali 1500, I put the phone top side down, and it would be fully charged when I got to work. I took it back for warranty work and they confirmed the issue. They replaced the wireless charger, but It still didn’t work. I tried the aligning adapters, no luck. I did a little research and found the part number of the charger changed between 2023 and 2025. I ordered the charger from my 2023 and installed it. Knock on wood, It charged my phone 3% on a quick drive to the gas station, and fully charged on my way to work. Here is the part numbers: 2025: 13563756 2023: 13556047

Thanks REDWNGR, Yes, I found the problem with your help. My 2023 was a GMC Denali 1500 (New Interior), my new truck is the 2025 2500 HD Denali, I see that the part numbers changed for the auxiliary camera and they are not compatible. I also found that I can simply swap out the camera, and not have to re run the entire wire harness, it’s just a matter of purchasing the $95 camera and opening up the existing with a security torx. I’ll update after I do the camera swap.

Yes, definitely pierce threw the fitting from the cabin side with an awl and push your fish tape threw twords the battery. Yes, definitely run everything down the passenger side sill plate, there are a few obsticles near the seat belt attachment, but you have a good view from front and back of the center post to make sure you are clear of wires and stuff. Here is the Kicker Manual that has great pictures: https://www.kicker.com/app/manuals/oe/gm/19417164.pdf 19417164.pdf