odave

I went with these. Comes with "extended" lug nuts. So far works great, 4000 miles no issues BORA 0.65 Spacers for 6x139.7 Sierra/Silverado 1500 (2014-2025+) (SOLD – SCOVEL MOTORSPORTS

I bought an led kit from www.f150leds.com. They were really white when off so I put some window tint on them. Now their almost invisible when off but still fairly bright when on. Wired them into drl's. They attach with 2 sided tape. The spacing is 6.5" center to center when centered in grill opening

I had a couple issues, I got my bezel w/switches off ebay and the pass switch did not work, My first power board from amazon had 1 channel ng. But after I got a new switch from gmparts-now and a new power board from a different vendor on amazon. It was all good. So cool to have heated seats this winter!!!

I have successfully completed this mod using Harlech's parts list, although I'm using factory heating elements. It works great and is relatively easy, but I did need Harlech's programming wizardry assistance The only draw back is the pulse width modulation used to control the 3 heat (L-M-H) settings needs adjusted as all 3 settings are extremely hot. I'm sure this has to do with me using the factory heating elements as they are designed to utilize a thyristor feed back signal to the bcm or seat module to control element temp and there is no way of utilizing it. This is by far the best/easiest way to add heated seats utilizing the factory switches. I'm planning on adding heated seats to the back seats using this same method. Big thanks to Harlech for all the work in figuring this out

Thanks for this!! I have hated the extreme brightness of the reverse camera since I bought the truck, even after the TSB 17-NA-269 update. Just completed the wire removal and it works great

SS502, try this link https://www.ebay.com/itm/Custom-Printed-Vinyl-Decals-3M-Die-cut-Available-Outdoor-Sign-Sticker-Logo/323351416905?ssPageName=STRK%3AMEBIDX%3AIT&var=512412945522&_trksid=p2057872.m2749.l2649

Ha! not exclusive. sent an image of "Z71" to https://www.ebay.com/itm/Custom-Printed-Vinyl-Decals

my Denali cluster did not come with the "Z71"logo. I got a decal on ebay, removed the lens and put the decal on the gauge face.

I missed the Z71 on my stock cluster, its a decal I got on ebay

Finally got my cluster installed!

some good info here

Sorry to hear about your ankle.. So did you get your heated seat set up installed and working? I know you had concerns about the mosfet board being able to handle the current draw of the heating elements. As I said I have seats with the factory heat only elements and am kinda struggling with the canny7 programming. 700hp? nice!

Hey Phil- I would like to order a harness. Tried to pm you but would not go through

Is that the speed warning you set in the dic options or the "posted" speed limit for the road your traveling on from the navigation. If that is the posted limit, Its awful small and is that the only page its displayed when enabled?

Anyone get a chance to get a picture of the Denali cluster posted speed limit display so I can compare to my Z71 cluster?

I'll try again next week, Thanks for the reply

just installed

I checked all my junk mail folders, 2 weeks, no response.

I have quotes from Rachel @ Specmo ($425 +17 shipping. new, not refurb, in stock) and Greg @ Pace Performance ($450+15 shipping. new, has to order) for part# 84380242. My problem is I can't verify with WAMS that this part number matches my vin. I have emailed twice a week or so ago (1 outside of business hours and one within) and as yet no response. Anyone know if WAMS is on vacation or are they just that busy?

What type of issues did he have?

I bought an led kit from www.f150leds.com. Spendy, but a nice kit. They were really white when off so I put some window tint on them. Now their almost invisible when off but still fairly bright when on. Wired them into drl's. They attach with 2 sided tape. The spacing is 6.5" center to center when centered in grill opening

I would prefer the Chevy My Link splash screen. Based on GTPprix's response, it seems he will program it to display the Chevy screen. If not I'll need to research part numbers for a cluster out of a Tahoe Premier, Thanks for the response

I would prefer the Chevy My Link splash screen. Based on GTPprix's response, it seems he will program it to display the Chevy screen. If not I'll need to research part numbers for a cluster out of a Tahoe Premier, Thanks for the response

That's a bummer. Did WAMS program it? Do you happen to remember the part number of your new cluster?

Anyone have a picture of where the posted speed limit is displayed on the denali cluster? Is it next the speed display like the z71 cluster?