Jump to content

Criscone

Member
 View Profile  See their activity

  • Posts

    209

  • Joined

  • Last visited

 Content Type 

Everything posted by Criscone

  1. Criscone
    Best place to get rear billstein or fox shocks? Running a 5” block. 17’ 1500 Sent from my iPhone using Tapatalk
  2. Criscone
    Not the best photo, parked on a hill and dirty but for some reason I can’t seem to get a good photo of it. Loving the new setup! Sent from my iPhone using Tapatalk
  3. Criscone
    Thanks! Has a few more things to make it perfect in my eyes. Suspension is a zone 4.5 with billstein 5100 struts set on 3rd setting (total lift 5.75”). Rear is 4” block now, but 5” is on the way. 305/55/20 falken at3w 20x10 -19 Hostile Sprocket Sent from my iPhone using Tapatalk
  4. Criscone
    Finally got the new setup in. The rear is almost an inch lower and it’s killing me. What are my options to gain .5-1” in the rear? Add-a-leaf adds to much. So maybe a 5” block? (4” block currently) airbags? I tow a heavy boat all summer, and where it sits now is normally how it is when towing. So I’d rather not have it dragging ass towing. Sent from my iPhone using Tapatalk
  5. Criscone
    Got my 5100’s in, does the factory spring perch come off and install onto the 5100’s? Sent from my iPhone using Tapatalk
  6. Criscone
    5” and 6” lift guys, what is the size of your rear block? I think only RC offers a 5”, so curious to what size the block is? I know zones 6.5 is a 5” block, but nobody else seems to have info on their rear block sizes. I’ll be running around 5-5.5” lift up front, so I’m trying to find the perfect rear block that sets me a touch higher in rear since I tow a big boat. Sent from my iPhone using Tapatalk
  7. Criscone
    Trim the bumpstop in half. Sent from my iPhone using Tapatalk
  8. Criscone
    I remember you did but than I see others didn’t. Was yours just at full lock? Lift comes in today but havnt made my mind up on wheels yet. Sent from my iPhone using Tapatalk
  9. Criscone
    I keep hearing that stock 20” wheels will hit the stamped control arms on a knuckle lift. Mainly the zone 4.5/6.5. Has anyone really had this issue? All terrain 20” wheels. Sent from my iPhone using Tapatalk
  10. Criscone
    I have a 17 Sierra with wireless charging. Obviously doesn’t charge my iPhone X. GM offers part# 84526978 - But is that everything? Will I still need the harness here? Thanks! Sent from my iPhone using Tapatalk
  11. Criscone
    What offset? Looks like + something? Sent from my iPhone using Tapatalk
  12. Criscone
    20x9 sprockets? Sent from my iPhone using Tapatalk
  13. Criscone
    That’s perfect. I remember my 4.5 being perfect but wasn’t sure how bad the 6.5 would be. I thought about modifying the strut spacers to 5.5” so it’s a happy medium between the 2, because I only want to run a 33, not a 35. Been there done that on a 1500, no thanks! Sent from my iPhone using Tapatalk
  14. Criscone
    Anyone have pictures of CV angles of the zone 6.5” kit? I had a 4.5, but looking to go up this time around I think. Old truck that was totaled out. Zone 4.5, Bora 1.5” rear spacers, 20x9 0 offset XD820, 305/55/20 falken at3w. Zero rub, zero issues. Well, except for being tboned on my way to work. Sent from my iPhone using Tapatalk
  15. Criscone
    Those are factory ranchos. What lift is this? Awful CV angle.. Sent from my iPhone using Tapatalk
  16. Criscone
    RC 2” level, front only - stock rear. Sent from my iPhone using Tapatalk
  17. Criscone
    15’ denali w/ magnaride - added an RC 2” level up front. Rear is 1” taller than front, which is perfect for me. Rides smooth, no issues. Here’s a before and after. Sent from my iPhone using Tapatalk
  18. Criscone
    Anyone running the mbrp side exit/in front of the wheel? Curious how it is/sounds etc. Sent from my iPhone using Tapatalk
  19. Criscone
    I’m sure it’s in here somewhere, but I can’t find it. LED bulbs for plate/cargo and reverse, do I need can-bus bulbs? I get all my led lights from superbrightleds.com however they offer normal and canbus for my truck (15 Sierra Denali) Sent from my iPhone using Tapatalk
  20. Criscone
    3.5 kit has diff drop spacers. I have heard this newer knuckle 3.5 is a good kit, unlike the control arm version. Sent from my iPhone using Tapatalk
  21. Criscone
    Anyone ever upgrade from a zone 4.5 to 6.5?
  22. Criscone
    33x12.5x20 - 20x9 with a 0 offset No trimming what so ever, no rubbing what so ever. To go bigger I would need to at least trim front valance/bumper cause that is real close. Rest I think I’d be ok. Sent from my iPhone using Tapatalk
  23. Criscone
    Zone 4.5” Sent from my iPhone using Tapatalk
  24. Criscone
    Just print it off the website. That’s what I did. As for welding, it says it’s needed however it looks to be strictly cosmetic in my opinion. I have not welded mine, and honestly probably won’t. Sent from my iPhone using Tapatalk
  25. Criscone
    I did mine in the driveway, by myself in 20-25deg weather and it took around 12hrs total split between Saturday-Sunday. Directions are extremely well written, I went down the list step by step checking them off as I went. Sent from my iPhone using Tapatalk
×
×
  • Create New...