Jump to content

8lugCT

Member
 View Profile  See their activity

  • Posts

    502

  • Joined

  • Last visited

 Content Type 

Everything posted by 8lugCT

  1. 8lugCT
    Is the OEM bulb harness that's plugged in closest to the battery?
  2. 8lugCT
    I had that problem, so I took the headlight out again, took out the top screws, and screwed them back in while pushing the top of the projectors so that it was secured at more of a downward angle. Either that, or you'll need to fully open your headlights so that you can seat the projectors properly
  3. 8lugCT
    Installed these Rigid DOT fogs that have been sitting in the box for over a year. After awhile, I decided that I wasn't a fan of what they'd look like. Recently I said screw it, and worst case I just remove them if i don't like them. These things are bright, and I think the look could grow on me. What I really didn't like was how the kit comes with stainless steel carriage bolts that can be seen behind the light, so I swapped them for black ones. Hopefully they don't rust or I'll have to suck it up and install the stainless ones.
  4. 8lugCT
    Sounds a bit drastic
  5. 8lugCT
    Lol until the tank runs out of air. What size tank?
  6. 8lugCT
    Contact this company: http://www.gruvenparts.com/gruvenparts-com-strengthened-spur-gear-for-2007-2014-gm-trucks-folding-mirror-assembly/ This motor is for an older model, but the page says 2015+ coming soon. Who knows when that was, but maybe they can help you. EDIT: Here you go. Says it's a pre-order. http://www.gruvenparts.com/gruvenparts-com-strengthened-folding-mirror-gear-for-2015-gm-trucks/
  7. 8lugCT
    I did have the factory halogen projectors, but didnt want to spend money on an HID kit to fit those to test it since I'd read that it's not really the correct type of projector. So to avoid potentially ordering two kits, I just went all out on the initial purchase.
  8. 8lugCT
    Installed my FXR projectors in my HD this past weekend. LET THERE BE LIGHT. 35w 5500k
  9. 8lugCT
    These motors can be purchased. I looked into it at one point when my passenger mirror motor failed after about one year. I had it replaced under warranty though.
  10. 8lugCT
    This has been on my list of things to do
  11. 8lugCT
    Clay bar it again. Put some elbow grease into it. Next step would probably be an orbital buffer if it bothers you that much
  12. 8lugCT
    Installed FXR HID projectors with the Morimoto XB35 5500k kit. Pain in the ass, but there is A LOT of light. Here are some driving shots Sent from my SM-N960U using Tapatalk
  13. 8lugCT
    get a new one... or a train horn
  14. 8lugCT
    sweet color. you should color-match the grill
  15. 8lugCT
    I was debating, but I ordered the diffusion option after looking at some videos on youtube. The floods look awesome, but are more of a direct beam pattern.
  16. 8lugCT
    you installed it in the console?
  17. 8lugCT
    have had mine for about 6 months. good purchase. always get compliments on it.
  18. 8lugCT
    Wouldn't have bought my truck without it
  19. 8lugCT
    don't count on it
  20. 8lugCT
    it was painful to read. im embarrassed for him
  21. 8lugCT
    Awesome wheel... too bad they dont make them in 8 lug
  22. 8lugCT
    looks like the only thing GM did with the liner is shortened that back bump stop, allowing the phone to sit toward the back more where the charger is placed. you could accomplish the same thing by rotating an earlier model year liner
  23. 8lugCT
    Ordered both of these and will be installing these on a mild day in the near future
  24. 8lugCT
    thanks for that link... just placed the order lol
  25. 8lugCT
    Looks low for that truck
×
×
  • Create New...