Jump to content

AdamAT4

Member
 View Profile  See their activity

  • Posts

    262

  • Joined

  • Last visited

 Content Type 

Everything posted by AdamAT4

  1. AdamAT4
    I did it with my ram, don't need the mirror for bed view tho. 3rd brake with camera was $1000 and harness i got made aftermarket as the ram has video plugs in the HU. Then I bought a software pkg from rax jailbreak and also gained the option to type while driving and a few other Easter eggs [emoji1639] Sent from my SM-N975W using Tapatalk
  2. AdamAT4
    It certainly would not be $250, you'd need software updates and wiring harness. Sent from my SM-N975W using Tapatalk
  3. AdamAT4
    That may be a generic description. Without doing a delete you will see no benefit! Id like to know how they can possibly think it reduces scavenging. So ridiculous [emoji19] Sent from my SM-N975W using Tapatalk
  4. AdamAT4
    It does nothing but lighten your wallet, if it was under five hundred bucks you could probably use it to get your exhaust tip to exit directly behind the rear wheel instead of on a 45 degree angle Sent from my SM-N975W using Tapatalk
  5. AdamAT4
    The description is vague, but if its a DPF back you're looking for its easier to burn money. They are pointless, just cut the trumpet tube off and get a tip. Sent from my SM-N975W using Tapatalk
  6. AdamAT4
    PM me Sent from my SM-N975W using Tapatalk
  7. AdamAT4
    Only problem is I can never use the upper gate then, I can only use a flush hitch cover and not a shackle which I liked Sent from my SM-N975W using Tapatalk
  8. AdamAT4
    Here's the gap I've made Sent from my SM-N975W using Tapatalk
  9. AdamAT4
    Picked up a few things today and it was also the first time I lower the upper gate since I added the red shackle tow hook and of course it sticks out just enough to put a dent in the gate between the handle and upper plastic trim. Has anyone made a small dent here before? I'm wondering if i took one of those black covers off if I could knock it out. I never really sized up how close the gate gets to the hitch and now I wish i did as its real close. Sent from my SM-N975W using Tapatalk
  10. AdamAT4
    has anyone added an LED bar to the intercooler slot of the 3.0 duramax lower grill pc. was thinking of getting one for my 6.2 to add an LED bar since Tuscany will not sell a Harley lower grill piece.
  11. AdamAT4
    As I said that's what I have now, bought it for the quick removal when loading dirt bikes or snowmobiles. Tail gate drops no issues, its not as water tight as mt previous MX4 and a thief can still get in easily but it does what i need I've carried a 150pound box on mine and had it strapped as best I could to not add extra weight and the cover didn't even flex. The 400 pounds is distributed weight so don't walk on it haha. A buddy put down a pc of plywood and carried a heavy couch with no issue Sent from my SM-N975W using Tapatalk
  12. AdamAT4
    Sure ill try and remember to snap it tomorrow Sent from my SM-T830 using Tapatalk
  13. AdamAT4
    Standard bed for the win!!! Id just buy an SUV instead of a short bed. Sent from my SM-N975W using Tapatalk
  14. AdamAT4
    I've had a few covers over the last couple of years. One reason was my bak roll up failed and had it replaced but got an MX4 instead. The MX4 has been the best hard cover for sure. Its not that heavy, no mechanism on the box rails like some others that will cut your legs. And it does not interfere with the auto down tail gate and you can close without lifting. This time I have a truxedo prox as I wantee something to remove in seconds. A lot of covers are in the way for dirt bike bikes. Sent from my SM-N975W using Tapatalk
  15. AdamAT4
    Yep those are the power wires for your accessories Sent from my SM-T830 using Tapatalk
  16. AdamAT4
    Here are mine paint matched. They stay in good with about half the tabs broken.. still a good bit of work to get out. When I do my custom headlights ill buy a new set and have them painted then throw these out. I'll need my bumper painted in about a year from now anyway. Sent from my SM-N975W using Tapatalk
  17. AdamAT4
    You need to be careful to pry on the bezel and not the truck front end. Sent from my SM-N975W using Tapatalk
  18. AdamAT4
    Its not easy, you need to be lucky to get them. Correct way is to remove the headlights and pinch the tabs or something along those lines. Too hard to access from below. Sent from my SM-N975W using Tapatalk
  19. AdamAT4
    I have all wera screwdrivers including torx and hex, pliers are knipex at home and klein at work. I have nearly every Milwaukee power tool as well and really like them. For ratchets I really like the gearwrench 120XP, snap on feel for far less and my wrenches are Jet. Sent from my SM-T830 using Tapatalk
  20. AdamAT4
    Ditch lights on AUX 1, once I get a trim pc for lower bumper ill put a bar there on AUX 2. 3 and 4 are currently undecided but AUX 5 will be flush mount flood lights in the rear bumper for night time toy loading/ reverse/ anti tail gater lights Trim is wrapped by a wrap company, high quality 3m air release rusted copper metallic. Expensive but looks soo good. Getting the door handles wrapped soon. Also waiting on my hydro dipper to get a matching carbon to do the radio bezel. Sent from my SM-T830 using Tapatalk
  21. AdamAT4
    While I was talking to them they said the parts are patent and exclusive to them. I assume a body shop would send in the vin and proof it was damaged. I'm curious if someone has used the 3.0 lower pc Sent from my SM-T830 using Tapatalk
  22. AdamAT4
    Not a chance, they want the Harley edition trucks they build to be unique. I'll try once they are all sold and maybe have some luck then Sent from my SM-N975W using Tapatalk
  23. AdamAT4
    Got mine all done, it was a lot of work but a very clean factory install. Now I need to get some lights. Sent from my SM-N975W using Tapatalk
  24. AdamAT4
    Awesome I'll give them a call, I love the F250 Harley Sent from my SM-N975W using Tapatalk
  25. AdamAT4
    I'm doing my free dealer changes.. local dealer has such high volume in sales they do 6 years of free maintenance, use to be lifetime actually. My uncle has a 1992 GMC 1500 and only paid for his first service earlier this year. But im doing 6 months as my distance will be less than owners manual. Sent from my SM-N975W using Tapatalk
×
×
  • Create New...