KTDanforth

I have been putting together the part list, if your have a digital Cluster already and programmed for it, I am some ware around the below: $650-700 for the projector, cables, frame and switch $700-$800 for dashboard from a take off Ebay need to find one cheaper. ???? windshield, there may be a work around with film overlay placement. I just finished upgrading my Cluster to the LTZ/High country, found a take off for $200, sent it out to be programmed $200, for $50 more they will add other options and include the HUD programming as well so my cluster is preprogrammed for it. The mirror camera upgrade is next, after that I might slowly start getting the parts for the HUD. Need to find better pricing on the parts.

Bumps, did you ever get the pictures?

I was able to do this for about $600-700 on each end, front set and back, After the resale of my original lights, it was about $500 out of pocket. It is a game changer on looks. Chevy should have included this set for all vehicles in the 2500 series.

Here is the detailed thread: I went with replacing whole fixtures out to LED in both the front and tail lights. Changing from halogen to LED headlights on LT, Custom, or WT trims - Page 6 - 2020+ Silverado HD & Sierra HD Mods - GM-Trucks.com

What brand are you running? Pictures?

the only one I have seen are on Ebay. Black ones: 2020-2021 Chevy Silverado 2500 HD BLACK grille insert grill overlay LT WT Cust | eBay Chrome ones: 2020-2022 Chevy Silverado 2500 HD chrome grille insert grill overlay LT WT Cust | eBay Not a big fan, as I prefer the LTZ grille as well not the LT will inserts.

follow this link, the console is about 2/3 down the page. Center Console for 2020 Chevrolet Silverado 2500 HD | GMPartsDirect.com

it might be this module, do you have it?

there is a remote detection module in console. you should have plugged it in. you can try to re-initialize the remotes

Has anyone tried installing a rear sliding window in the vehicle? OEM of course. thank you in advance

Were you able to actual do this?, I have an IOR 8 inch, with XM, what was you actual configuration. thank you

We all can debate is it worth doing, the mighty cost of it will dive it in to yes or no column for many. but does any know if it can be completed with the end user , by just buying the part an install them our selves? We can change out our display, which links to HUB but that is all I know. Does any one else have any information?

Looks Good, nice and flush

Do you have some side profile pictures?

Do you any pictures from the side, do you have any rubbing issues?

What size did you go with?

I got side tracked and have not tried it yet. I need to trace the existing cable to confirm the connector.

I am interested as well.

Looks great, I just added something to my list.

There is a whole thread on this by Hotairgypsy. He did a fantastic job paving the way for us on this subject. How to add cab lights to a 2020+ Silverado - 2020+ Silverado HD & Sierra HD Mods - GM-Trucks.com Good Luck, I added myself and love the way they look.

1. I remove them? You will end with 5 holes in you roof, might get a little wet. 2. Replaced the bulbs with white/led? You can buy a single unit to test to see if than can be done, low $ risk. 3. I thought of adding dark vinyl to try to change the look. Shrink wrap might work. 4. My last thought is just pulling the fuse. You disconnect them in the driver side column. I think about all the work I went thru to install mine but I guess "it is to each his own". Good luck on which ever route you travel.

Just wanted to say thank you, just competed the installation this evening. You saved me a lot of hart ache. I did go with the Greenlee, I found an older model #731 but new unit for under $100. Thanks again

Wow looks great. Wait til you take the out at night. Lookin Good man.

I have an old change coming in a few weeks, ROMs is my number one opportunity. Back on the TIS2WEB, there is not cost or proof of a certified repair shop ( needed to sent to GM) to have access?

How did you get access to TIS2WEB.