Jump to content

EZ Money

Member
  • Posts

    98
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by EZ Money

  1. Those tires are going for $250 each by themselves. Unfortunately I cannot go that low.
  2. I have a set of take-off wheels and tires, stock Black Trail Boss wheels (18”) and Duratrack tires with less than 6000 miles on them. TPMS sensors included. Asking $1600 firm, Arizona only...not shipping.
  3. Vision Rocker, 22x10 (-19) Nitto Ridge Grappler, 285/55/22 Bracket mod w/ major trimmed splash guards, minor rub
  4. I am sitting at 42-1/4" in the front and rear. Additionally the pinch molding under the cab is sitting dead level at 18-1/2".
  5. JUST LIFTED...Hot out of the shop! 2020 Trail Boss LT 2" Zone level w/ UCAs 22x10 (-19) Vision Rocker 285/55/22 Nitto Ridge Grapplers
  6. 2020 Trail Boss LT 2" Zone level with UCAs 22x10 Vision Rocker (-19) 285/55/22 Nitto Ridge Grappler
  7. The reason there is still a noticeable rake with the Readylift is because the 2" SST kit comes with a 3" block for the rear. The TB and AT4 don't need a bigger block in the rear if you want to level it out. I have seen a few guys install only the front of the Readylift kit. I ordered and will be installing a 1.75" Zone life with their UCAs. They are beefy UCAs.
  8. The reason there is still a noticeable rake with the Readylift is because the 2" SST kit comes with a 3" block for the rear. The TB and AT4 don't need a bigger block in the rear if you want to level it out. I have seen a few guys install only the front of the Readylift kit. I ordered and will be installing a 1.75" Zone life with their UCAs. They are beefy UCAs.
  9. The reason there is still a noticeable rake with the Readylift is because the 2" SST kit comes with a 3" block for the rear. The TB and AT4 don't need a bigger block in the rear if you want to level it out. I have seen a few guys install only the front of the Readylift kit. I ordered and will be installing a 1.75" Zone life with their UCAs. They are beefy UCAs.
  10. Yes, de-badged the entire truck including that little Z71 emblem on the grill and replaced the factory black/chrome Chevy emblems with an all black powder coated billet emblem. Also did 2 coats of a ceramic sealant.
  11. Lift kit, wheels, and tires coming soon. All of the small stuff is already done...
  12. I just added the MX4 to my TB yesterday. Install took about 30 minutes and is a huge upgrade from my previous Bakflip.
  13. I pulled them but also don’t like the open holes in the top of the seats.
  14. The middle headrest doesn’t have the same spread. It doesn’t fit.
  15. I'm a form over function kind-of guy. I'd rather find a headrest that fits...maybe out of a Tahoe or something, that is much smaller. My son sits back there all the time plus I don't like the way the look folded down.
  16. Has anyone found a replacement headrest for the oversized rears? They don't really get in the way, but they are HUGE, ugly, and (IMO) unnecessary. Has anyone toyed around with changing them out for a different headrest?
  17. Anyone find a way to change the wallpaper on the infotainment screen?
  18. The Z71 emblem is a real ****** to remove. You’ve got to pull the grill and it has clips holding it to a backing plate that are VERY tight. I ended up breaking mine off.
  19. If it has those defects in in, just from shipping, I’d be concerned about a good sized bug or rock hitting it! AMI powder coated should be able to take more impact.
  20. This is a billet bow-tie from AMI. It’s billet aluminum and powder coated black. You need to order the one for a 2018 Chevy Tahoe. That is what this one is. It is exactly the same size and fits perfectly. No modifications necessary.
  21. I used ones from Autozone. I’ve gotten the ones from Amazon and they all seem to stop working too soon. the ones from Autozone have lasted a few years.
×
×
  • Create New...