Jump to content

LongrangeLauber

Moderator
 View Profile  See their activity

  • Posts

    6,337

  • Joined

  • Last visited

  • Days Won

    22

 Content Type 

Everything posted by LongrangeLauber

  1. LongrangeLauber
    Cleaned my glass with this: Did a really good job taking off all the hard water spots and made it really shine. Just put a coat of rain x on it and I should be seeing clearly now. Also plan on taking the truck into the shop I had my differentials set up at. The pinion seal is leaking (been so for a while) and the fluid seemed black so I'll have him pull the cover and check the locker cause I had it up in the air today and was making some pretty bad noises Sent while drinkin' a cold one...
  2. LongrangeLauber
    Maybe I should just pay a shop to do everything. Every time I touch it it breaks lol wait! I'm fixing their mistakes that's right Sent while drinkin' a cold one...
  3. LongrangeLauber
    For 35x12.5r17 I think I paid like 390 a tire. Bit expensive but met and live up to all my expectations so far. I'm not off roading much so it does what it needs to do. I would stick with your tires you have now until they wear out cause you may want to lift it more and want bigger tires like I did lol Sent while drinkin' a cold one...
  4. LongrangeLauber
    I'm gonna jack it up hopefully this weekend and still check it. Gotta adjust e brake, check my pads and rotors (get a studder like feeling when I'm coming to a stop) and hopefully I'll have my new front shocks by then Sent while drinkin' a cold one...
  5. LongrangeLauber
    Just noticed a deep growling noise from what seems like the rear end. Sounds like a bearing going bad. Weird cause I just rebuilt that damn thing 6 months ago. Have to jack it up when the rain clears and see where it's coming from. Only happens while accelerating and really hard to pin point cause it happens around 55+ while accelerating and I drive mostly backroads. Goes away while coasting though, maybe just gear noise? Sent while drinkin' a cold one...
  6. LongrangeLauber
    You looking specifically for mud terrain tires? Cause my all terrain dick cepek fc2's are great. They grip good on the road and aren't terrible off road, obviously there are better. Actually pretty quiet for the most part and wear really well if you keep them rotated (also helps with noise like any tire). Have about 25-30k on them and they still look like they have at least half tread if not more. Have also done a handful of burnouts with them lol Sent while drinkin' a cold one...
  7. LongrangeLauber
    I was also thinking dawn dish soap, cause they use it to get oil out of the birds feathers from oil spills!! Lol. I hadn't thought of simple green I'll do that at work cause we keep gallons of it. Thanks yall! Sent while drinkin' a cold one...
  8. LongrangeLauber
    Yeah that post was from 3 years ago lol Sent while drinkin' a cold one...
  9. LongrangeLauber
    Any tips on getting the slippery feeling out of the plastic from the oil? I tried purple power and it didn't work. Power washer is my next step. Anything else? Sent while drinkin' a cold one...
  10. LongrangeLauber
    I had people staring at me at the gas station cause the oil was rolling out of the bed onto the ground lol Sent while drinkin' a cold one...
  11. LongrangeLauber
    Taking truck and trailer in for inspection as well as dump some oil. The bucket decides to slide forward and tip half of the oil out in the bed of my truck. FML!!! Sent while drinkin' a cold one...
  12. LongrangeLauber
    I'm gonna take it to my exhaust guy and have him cut them back and then keep this muffler with dual outs and dump it right past the axle and have the tips stick out enough to see them. Probably keep them cleaner a lot longer too, the tips that is Sent while drinkin' a cold one...
  13. LongrangeLauber
    Got dat Cali lean goin on... Sent while drinkin' a cold one...
  14. LongrangeLauber
    Tailgating at the race My buddies Hitch grille, it's awesome Sent while drinkin' a cold one...
  15. LongrangeLauber
    I'll get a lot more today. I'm gonna be at the race! Plus you'll have to see what me and my buddy fabbed up for tailgating Sent while drinkin' a cold one...
  16. LongrangeLauber
    Lol. Remember those pictures you wanted like 6 months ago? Here it is hahahaha Sent while drinkin' a cold one...
  17. LongrangeLauber
    Bout the cleanest it's gonna get lol Sent while drinkin' a cold one...
  18. LongrangeLauber
    No stock 2" block back there already? I thought all half tons came with rear blocks? Sent while drinkin' a cold one...
  19. LongrangeLauber
    Rid of em so soon?? Sent while drinkin' a cold one...
  20. LongrangeLauber
    Pulled a leaf. Dropped it about an inch. Will see how it rides in the morning. Plan to decrank 3/4" inch to level her out and soften the ride a bit Sent while drinkin' a cold one...
  21. LongrangeLauber
    not necessarily. I'm not losing but an inch or so. Won't look too much different but let's hope it will ride a lot nicer Sent while drinkin' a cold one...
  22. LongrangeLauber
    Got rid of the exhaust rattle today, tomorrow and Friday plan on pulling the AAL and decrank my tbars. Also me and my buddy built a little something for the race on saturday for tailgating. I'll take a pic of it tom. Sent while drinkin' a cold one...
  23. LongrangeLauber
    I believe my catalytic converter is busted up inside my exhaust cause something is rattling real bad and that's what it sounds like. Oh well who needs those lol Sent while drinkin' a cold one...
  24. LongrangeLauber
    Shouldn't have gotten rid of those Moto Metal wheels. They looked good on your truck Sent while drinkin' a cold one...
  25. LongrangeLauber
    Bilstein 5160's installed. Much nicer now The clearances to the exhaust is quite close. May get some exhaust work done so I don't mess these expense ass shocks up. May also decrank my bars about an inch and pull the AAL in the rear cause this thing rides like hell compared to the VW I was driving for the last 6 weeks. Hopefully all that will soften it back up along with higher quality shocks (just ordered 5160's for the front as well lol) at the expense of a couple inches lost for my lift, oh well Sent while drinkin' a cold one...
×
×
  • Create New...