Jump to content

2003 Silverado Moulding Issues..HELP

chanswork

Recommended Posts

chanswork Enthusiast

chanswork

Posted
Posted

Hello,

 

I'm experiencing some problems with my white 2003 silverado door mouldings. The top layer of the mouldings are experiencing fading and discoloration. I brought this to the dealer and they told me that it's "normal" and it's just "fallout". Being that this is a 2003 model and it's also out of warranty, I've tried to contact GM regarding replacement mouldings. Does anyone have this problem and had success in getting replacement mouldings?? I feel this is totally out of order to have paint/discoloration problems on a 2003 model. The body shop guys are telling me that GM actually has a "ticket number" that authorizes the replacements of these so called "defective mouldings". I'm trying to get my hands on this ticket number or authorization code so I can get mine replaced. Any feedback or help on this topic will be appreciated. thanks.

rjirvine Enthusiast

rjirvine

Posted
Posted

Are they black? If so use "back to black" it comes in a red bottle for around $5 and works great on black trim like the bumper guards, air dam and bug deflector etc.

MustGoFaster Enthusiast

MustGoFaster

Posted
Posted

B2B rocks, I used it all the time on my bike.

one thing I will add though. it always seemed to me that it worked best and lasted longest if it was out of the sunlight when applied, and if I kinda just "gooped" it on in one pass, waited a few mins and then wiped it over again with a rag that was pretty wet with the stuff.

2004crewk2500 New Member

2004crewk2500

Posted
Posted

Just had the dealer replace my chrome moldings on 2004 gmc crew k2500 non hd.

had other service done before warranty expired and showed the service tech bubbling under the phony chrome trim . he replaced them for no charge since i have bought 3 gmc's from dealership in past 3 years.

Its good to keep your business local!

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,840
    Total Members
    8,960
    Most Online
    appletrav
    Newest Member
    appletrav
    Joined

  • Who's Online   0 Members, 0 Anonymous, 291 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • newdude
      2 speed transfer case optional now?

      By newdude · Posted

      This is a 1/2 ton thing ONLY.  All HDs 2020-2026 have the two speed transfer case, with Autotrac as an option.     1/2 tons 2019-2026, regular 4x4s come with a single speed case (no 4LO!), and trucks with Z71 ordered, or all Trail Boss trucks come with the 2 speed case.  2 speed case is also an option on WT, and is also standard on High Country.  
    • newdude
      Different requirements for oil filters?

      By newdude · Posted

      2013 5.3 still to this day calls for the PF48 filter.  Which as a 15psi bypass pressure.     There is a TSB, 17-NA-157 that talks about the PF-63 and PF-64 filters which have a higher bypass rating of 22psi.    TSB HERE - temp.xml   "Beginning in 2012, the oil pumps began to regulate main gallery feedback instead of pump out pressure. This means that the oil pump now does not begin to regulate until pressure is built up to the main gallery. This change reduces the amount of time it takes to provide oil to the engine bearing and lifters during extreme cold start conditions.  Main gallery feedback oil pump control systems are present on the following engine families which use Spin-on oil filters: Small Gas Engine (SGE), Large Gas Engine (LGE), High Feature (HFV6) Gen2 and Small Block Gen5 gasoline engines. These engines with the main gallery feedback oil pump control systems are factory built with an ACDelco® oil filters"   It also calls out what engines use those filters.  The gen 4 small blocks were not on that list (LMG, LC9, L9H, L92, L94, L20, L96).  Gen 5 small blocks use the higher pressure filter.          That all said...   Your 7045 Napa filter is the PF63 equivalent, with 22psi bypass.  You are already using the higher bypass pressure filter.  You CAN keep using it, you don't technically have to use it though.  
    • Grumpy Bear
      Different requirements for oil filters?

      By Grumpy Bear · Posted

      Do you know WHY the filter relief setting was increased to 22 psig?    When the new system goes into the second stage the pump volume ramps up considerably. It was found that the 15 psi filter bypass setting put the filter in bypass on a warm engine when the second stage was activated. Raising the filter bypass setting forced the filter to do what it designed to do. Filter. Preventing debris from circulating during high load, high rpm operation.    So next question is how did GM find this out? VLOM/lifter failures and a deep dive by Melling Corp.    Last question. Is it required? Look at it like this; a motor may be equipped with a rev limiter. But it only works if the set point in reached. That 22 psig setting only matters if the pressure differential across the filter media exceeds 15 psig during normal warm operation. Second stage kicks in around 3000-3500 rpm.    I can't answer your question because I don't know you and how you use the truck. But I think there is enough information here to let you decide for yourself. 😉
    • Coastie05
      give me some tips to make my truck look better

      By Coastie05 · Posted

      Go back to OEM wheels. 
    • newdude
      2020 Trailboss 6.2 replacement

      By newdude · Posted

      Probably not their first rodeo, so it should go as planned most likely.  Typically the service manager or tech doing the swap will put some seat time to shake it down after they get it all put back together.  We usually put 50-100mi before we hand them back so if something happens, its not after you get it.  A coolant leaks, oil leaks, a ground left off or loose, vibration, etc.     The new engines so far have been good?  There's been a couple that have popped out there again (the replacement engine) but most have been okay.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...