Jump to content

Clocked92

Member
 View Profile  See their activity

  • Posts

    475

  • Joined

  • Last visited

 Content Type 

Everything posted by Clocked92

  1. Clocked92
    My Bilstein 5100's arrived yesterday afternoon! It only took 2 days to get them from the time I ordered them! Didn't expect to get them this fast, now I've gotta go find a shop and try to get tires put on here in the next week or two.
  2. Clocked92
    I'm going with Bilstein 5100's here in the next week or so. I want to put them on their highest setting for the most amount of lift in the front. How will my ride quality compare to stock if they are at the max setting?
  3. Clocked92
    My dealer phoned me the other day and told me they have a few trucks lined up to get the frame fixed. Mine is 3rd in line. The first one they are doing is the General Manager's truck. I'm assuming they will try to do the best job they can on his truck and then they can do mine. I'd really like to see before and after pics of the managers truck before I give them my truck.
  4. Clocked92
    I ordered my 5100's this afternoon. The guy said they had them in stock and would ship tomorrow!
  5. Clocked92
    I ordered a pair of 5100's this afternoon. Can't wait until they get here! Now time to do some tire shopping!
  6. Clocked92
    Ya just a paint touch up pen from the dealer. Cost me $10 I think.
  7. Clocked92
    I had a local installer do it for me. Took a day or so to do and cost me like $1000, but after seeing some of the All terrain trucks with rock chips, I'm so glad I spent the money for it.
  8. Clocked92
    I love my Iridium All Terrain. Only wish is that it came with cooled seats. I had an Xpel Clear bra put on the front end a week after I bought it. I've noticed a couple little paint chips here and there but I've touched them up before they got bigger and now I can't even notice them.
  9. Clocked92
    That was my planned switch location for whenever I get a lightbar. I had asked almost everywhere and nobody had done it. I have looked at trying to get that plate out too and I'd be scared I'd break something too.
  10. Clocked92
    YESSSS!!!! someone finally installed a rocker switch in the 12V outlet location!!!
  11. Clocked92
    275/65R20 will not fit on a stock sierra. You need a leveling kit so they won't rub. You should be able to do 275/6R20 without a level though
  12. Clocked92
    Just wondering, I have 2 Rigid D2 Driving beam light in place of my factory fog lights. They are bright and light up the ditches but still don't light up any farther than my factory low beams. I don't want to do the mod to make my fogs come on with my hi beams. Is a spot light or combo beam light bar really going to make that much of a difference if I add one behind my grille?
  13. Clocked92
    Block in the rear or just the front spacers?
  14. Clocked92
    I have heard that KO2's run somewhat small compared to their listed size. What I would like to see, is actual measurements of the tire when on the truck. For example, is a 275/65 R20 actually 34" tall, or is it slightly smaller once under load on the truck?
  15. Clocked92
    I haven't done it yet, but whenever I get a light bar, I am adding a circular rocker switch in place of one of the 12V Cigarette lighter spots in my center console. That way, it will have the factory cover that I can flip down over it when not in use.
  16. Clocked92
    Is it just me or they on backwards? I thought the slats were suppose to go the other way. Another member here put them on backwards as well.
  17. Clocked92
    Thanks! I would plan on keeping my factory AT wheels and their offset would be different than the Fuel's. I'm assuming I'd have a little more room to play with, with the different offset.
  18. Clocked92
    No worries, I appreciate it.
  19. Clocked92
    I love them. I almost try to drive more at night just so I can use them.
  20. Clocked92
    Did it by hand with a Mother's polishing compound. I have never used a rotary polisher but that is what the body shop used on the previous blemishes I had done.
  21. Clocked92
    I have an Iridium Metallic Truck. When I picked up my truck, it had a haze spot in the paint about the size of my palm. It actually looked like a hand print smudge. After washing and waxing, it didn't come out. I took it down to the dealer and they did something with their buffing wheel and got it out. I polished a couple scratches out of my truck lately now and I have a couple of these haze spots again. What is the best way to get rid of them permanently?
  22. Clocked92
    That would be awesome! Thanks!
  23. Clocked92
    Updated Pic of the front of my truck with Rigid D2 Driving lights and Dipped GMC logo.
  24. Clocked92
    I am looking to Level with Fox Coilovers and go with KO2's on factory AT wheels. How much level did you get out of the coilovers? would you be able to go with a 275/65R20 tire rather than 275/60's?
  25. Clocked92
    I was just walking around the Ford dealership yesterday because I like to go look at new vehicles on sundays when I'm not busy. I got looking at the new F150's and checked out their frames. They appear to be painted/powdercoated. All I know is that they are a lot harder than the wax coating on the GM's.
×
×
  • Create New...