cleatusbeaucifus

Heads up to anyone looking to get a Blackbear custom tune. BB running a $40 off this labor day weekend. Purchased my tune on Wednesday...fail. Also their website seems to be down so can't get to the instructions for starting the data log. *Biting my nails *

Anyone on here do just a muffler swap with a borla muffler? Not a cat-back just the muffler.

Anybody got experience with the throttle body spacers that AirRaid has to offer? Does it really add that much noticeable low end torque? Seems kind of iffy but wanted to check and see if anyone else has tried them.

Hey guys. So I installed my Morimoto 35W 5000K kit with Fx-R 3.0 projectors a few weeks ago. I encountered several issues with mounting the projectors along the way. Most likely because this was my first retrofit however I was surprised by how much I had to cut out of the back cap of my Silvy LTZ headlights after reading how easy everyone on here was completing this retrofit. The first time I buttoned everything up I used the butyl glue to keep the moisture out but I had to take everything back apart because the projectors were pointed to the sky and the adjustment screw was bottomed out. This was an absolute mess! The glue got all over everything!!!!! After I got my adjustment issue resolved I tried to seal the back up with aluminum tape. This worked ok but I'm starting to see moisture fogging up my lenses. When I called TRS to see what they recommend, they were surprised that I was having these issues and that I had to cut so much out of the back of the cap. He was saying that most people on this forum was just cutting a hole in the back of the cap and using the rubber grommet supplied in the kit. I could not get the cap to fit by just cutting a hole due the the connector wire and I certainly couldn't get the rubber grommet to go over the connector. I have two questions for all the knowledgable folks on this forum. 1) How did everyone else cut out the hole in the back of their housings? Were you able to use the rubber grommet supplied? 2) Is the butyl glue really the best option for sealing the back of the housing? Thanks for any inputs!

Hey guys. Been using this forum for awhile now and finally decided to join. Great forum and great thread! Just curious, now that these trucks have been out awhile and lot of people are doing this mod, who all out there has done HID fogs? If so, have you experienced any issues and what kits did you use? (I understand the risk of the previous mentioned heating problems but just curious if there is a product out there that more than one person has had success with.)