Jump to content

chevyzr1

Member
 View Profile  See their activity

  • Posts

    21

  • Joined

  • Last visited

 Content Type 

Everything posted by chevyzr1

  1. chevyzr1
    If connected correctly you will have all usb inputs connected on the back of the DVD player. I paid 80$ for the cable plus 30$ shipping. I'll let it go for 70$ including shipping. I'll find sometime this weekend to get on my laptop and send you the schematic I have !
  2. chevyzr1
    That is the rear hdmi input that mounts to the center console. I ordered it and it was lost in shipping so I ordered another and then that one ended up showing up months later.
  3. chevyzr1
    The picture of the coiled up cable is the one I mentioned in that post. The rear hdmi inputs will work without the dash harness but you need the double usb cable and the one I have as well.
  4. chevyzr1
    Also have an extra Blu ray and here's the pic of the stand alone overhead usb cable. These parts were all for my 2019 2500hd and to my knowledge 2018-2019 share the same part numbers.
  5. chevyzr1
    Dash harness part #84024486
  6. chevyzr1
    This is the complete headliner harness for the overhead screen and the other picture is the usb harness we talked about
  7. chevyzr1
  8. chevyzr1
  9. chevyzr1
    Yes they are for Blu ray. The reason I have so many is I didn't realize that center console harness already came with one plus the guy I purchased the flip down screen and rear inputs also sent me one. I also have extras of the overhead usb cable for the same reason, I didn't realize the headliner harness came with one so I ordered one separate. I didn't end up using the headliner harness because I didn't want to have to drop the whole headliner so I have that as well. I'll send you some pictures and dig up the part number for the dash harness. What year/model truck do you have ?
  10. chevyzr1
    You're not kidding ! Like I said I had to order the entire dash harness to get it. I guess on the flip side I have an entire dash harness minus that connector for future activities haha ! Good luck. Try another dealer. I've bought several variations of usb cables stand alone. If you're in need of the console wiring harness or the usb-c cable that splits off from the rear inputs let me know. I have 3 sets of them !
  11. chevyzr1
    I had to order the entire dash harness to get that cable. Luckily I took pictures of it after stripping the harness up before I installed it with the hopes it might help someone else out some day. Good luck!
  12. chevyzr1
    13955134
  13. chevyzr1
    Did you have to wire them for the drl's to be on the leds or do they come that way ? I also ordered these for my 2019 and I'm still waiting on them. One thing I'm a little disappointed with after seeing your pictures is it looks like the side marker has an amber lens yet on the trs website they make it look like it's a clear lens with an amber bulb. Looks a million times better than factory headlights !!!! How is the performance? I have the d2s projectors with dense bulbs and computers and I will say I think they'll be hard to beat as far as output. Thanks again for sharing they look great !
  14. chevyzr1
    Here is a picture of the back of my cluster. If you look closely you'll see that while there is a cut out for the connector, no connector exists in the opening.
  15. chevyzr1
    Are these still for sale ?
  16. chevyzr1
    If you get a chance could you verify that the connector is there ? I had mine programmed for it but the opening where the connector is supposed to be does not have the connector.
  17. chevyzr1
    Thank you for the detailed write up and words of encouragement. I will be sure to document and take several pictures of the process to share. On the hud retrofit, I too purchased a Denali cluster and had it programmed as well as a hud and harness, but unfortunately since I have a diesel the cluster I was sent does not have the usb connector that connects it to the hud. I spoke with Chris white and he said at this time they don't have a remedy. I've been thinking of buying a used cluster with the hud output and trying to remove the connector off the board and soldering it on to this cluster as it has the menu on the dic for adjusting the hud location on the windshield so I believe the programming is there.
  18. chevyzr1
    Do you have any pointers on removing the steering wheel ? Also did you notice any rattles or things not seeming as tight after resembling ? Thank you for the advice !
  19. chevyzr1
    So unfortunately for me you are correct. The console harness has 5 additional wire that the mating harness does not have. Fortunately I was able to find a schematic online that shows the pin outs on the hdmi input board and it appears that two of the wires are power and ground and the other 3 are for the wired headphone jack on the board. So I ordered a dash harness and received it today ! My only dilemma now is deciding on wether I should try to trace and remove the parts that I need or replace the entire dash harness. I will say looking at this harness is very intimidating as there are ALOT of connections !
  20. chevyzr1
    Thank you very much for that! One more question I have is, with the center console wiring harness, is it possible to get it to work without changing the dash harness ? The harness that I got with the overhead screen already has an lvds cable that's labeled rear hdmi and it looks like the console harness has the usb cable for the usb inputs in the rear so maybe it's possible that I won't need it or maybe I can just part out the part that I will need ? Any help on this is really appreciated !
  21. chevyzr1
    Do you happen to know the part number of the dash harness for rse you used ? I just installed everything in my 2019 except for the rear inputs, I have the hdmi board, the console harness, and the usb connector for the hdmi coming from the DVD player but I,m having a hard time finding the dash harness. Thank you
×
×
  • Create New...